User's Guide

Bookmarks

> Ref. Image Manage. > [Ref. Image Manage.] Screen > [InspectionAreaSet.] > [Select Area Type]

[Select Area Type]

Overview

Select the type of the area to set.

Select this item from the menu list.

Specifications

Category		Adjustment / Maintenance
Location	Machine	Touch Panel
	Printer driver	-
	Application	-
Required options		All the following optional devices are required. Intelligent Quality Optimizer IQ-501 Auto Inspection Unit UK-301 Relay Unit RU-702 Video Interface Kit VI-514 Video Interface Kit VI-515
Required items		-
Setting items		[Inspection Excluding Area]	Sets an area that is not subject to automatic inspection.
		[Barcode Area]	Sets an area targeted for bar code inspection. This function reads and decodes the bar code in the target area. You can also check whether the numeric value changes sequentially. For details on the types of corresponding bar codes, refer to "Select Bar Code Type" on [Select Area].
		[Serial No. (0-9) Area]	Sets an area targeted for serial number (number) inspection. This function reads and decodes the number in the target area. You can also check whether the numeric value changes sequentially. The read number must satisfy the following conditions. Font type: Gothic / Arial Font size: 8 points or more Background color: White Number of characters: 20 There must be a margin of at least 5 mm around text.
		[Specified Level Area]	Performs the automatic inspection at the individually specified inspection level. For details about the setting procedure, refer to [Automatic Inspection Level Setting].
		[Variable Area]	Sets a part of the paper face as a variable area when conducting variable printing. This item is available only when the reference image is RIP data. For example, if the value changes from 1 to 100 in a job with the same image except for the numeric value, the numeric value part can be set as a variable area. If you register RIP data of only 1 sheet used as the reference image and set a variable area even when printing a job of 100 sheets, you can conduct the automatic inspection for a job of 100 sheets.
Remarks		[Barcode Area] and [Serial No. (0-9) Area] are optional functions. They are not displayed by default. To use this setting, please contact your service representative. If a space between numbers in the target area is narrow when a number is read using [Serial No. (0-9) Area], a recognition error may occur.
Reference		-
Screen access		Touch panel - [MACHINE] - [Ref. Image Manage.] - [Reference Image List 1] - Select a row. - [InspectionAreaSet.]

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.