User's Guide

> Network / Security > Getting Set Up Without Specialized Knowledge > Simple Security Setting > [Web Connection Setting]

[Web Connection Setting]

Overview
Procedure (Machine)
Procedure (Image Controller)

Overview

Web Connection can be used by opening and closing the ports on the machine or Image Controller. However, open ports potentially allow users with ill-intent to access the machine or Image Controller. It is recommended that you close ports for this setting if you are not using Web Connection as there is a risk of problems occurring if you do not perform strict security management.

Procedure (Machine)

1
Press Utility/Counter, and then press in order of [Quick Security Setting] - [Web Connection Setting].
2
Select [Enable] or [Disable].
3
Press [OK].

Procedure (Image Controller)

1

Press Utility/Counter, and then press in order of [Administrator Setting] - [Controller] - [Simple Security Setting] - [Web Connection Setting].

2

Select [Enable] or [Disable].

3

Press [OK].

Bookmarks

If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.

Filter by option

Filter by title

Filter by category

All of the functions in this user's guide are classified according to the category.
By selecting the check box for the desired category, you can narrow the search range.
Multiple choices are possible.

Filter by location

You can search according to the operation location or application.
Multiple choices are possible.

Filter by option

You can search according to the available functions or specifications of the installed options.
Select the check box for the desired option from the list of installed options.
Multiple choices are possible.

Filter by title

You can narrow the search range from the menu for this user's guide.
However, you cannot search using only the "Filter by title" option. When using this option, also select another search filter item.
Multiple choices are possible.