[2nd Trans. Voltage Shift from Lead Edge (Back)]
Overview
Set [2nd Trans. Voltage Shift from Lead Edge (Back)].
Select the level when paper wrapping around the intermediate transfer belt or the 2nd transfer belt occurs while printing the back side in thin paper feeding mode.
Tips
- Set the value to the positive side: Each time the level is increased, poor separation of thin paper is improved. However, the loss amount of the image at the lead edge increases in increments of 1 mm / 0.039".
- Set the value to the negative side: Each time the level is decreased, the loss amount of the image at the lead edge is improved in increments of 1 mm / 0.039". However, poor separation of thin paper may occur.
Specifications
Category | Print Workflow, Copy / Scan, Adjustment / Maintenance | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | -[Auto] | Automatically switches the separation bias timing of the back side. This setting automatically controls the loss amount of the image at the lead edge depending on the paper type or paper weight. | |
[OFF] | Does not automatically switch the separation bias timing of the back side. The loss amount of the image at the lead edge is fixed to 0 mm / 0" regardless of the paper type or paper weight. | ||
[ON] | Sets the search range. Adjustment range: [-5~+10] | ||
Remarks | -: Default | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [Expert Adj.] | ||
Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [Expert Adj.] | |||
Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [Paper Type] - [Expert Adj.] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.