[Rear Edge Slight Pressure Amount]
Overview
Set [Rear Edge Slight Pressure Amount].
When [Lead:OFF/Rear:ON] is set in [2nd Transfer High Speed Crimping/Spacing Set.], adjust the 2nd transfer release amount (a gap at the time of release).
Set the adjustment range when an image jitter occurs on thick paper.
Tips
- Adjusting only [Rear Edge Slight Pressure Amount] may cause image jitter to get worse.
Reference
- For details about [2nd Transfer High Speed Crimping/Spacing Set.], refer to [2nd Transfer High Speed Crimping/Spacing Set.].
Specifications
Category | Print Workflow, Copy / Scan, Adjustment / Maintenance | ||
Location | Machine | Touch Panel | |
Printer driver | - | ||
Application | - | ||
Required options | - | ||
Required items | - | ||
Setting items | Entry field | Use the on-screen keypad to set the value. | |
Keypad | Used to enter numeric values. Press [+ / -], and set the sign of the numeric value. Range: -20 to +20 | ||
[Reset] | Returns all the entered numeric values to "0". | ||
Remarks | - | ||
Reference | - | ||
Screen access | Touch panel - [MACHINE] - [Paper Setting] - [Change Set] - [Expert Adj.] | ||
Touch panel - [MACHINE] - [Paper Setting] - [New Setting] - [Expert Adj.] | |||
Touch panel - [MACHINE] - [Reg./Del.PaperSet.] - [Add/Edit] - [Paper Type] - [Expert Adj.] | |||
in the upper-right of a page, it turns into 
and is registered as a bookmark.