Settings of the Image Controller
Configure the network settings for the image controller.
[TCP/IP Setting]
Set the IP address in [Administrator Setting] - [Network Setting] - [NIC Setting] - [TCP/IP Setting] on the machine.
[JSP Setting]
Check the port number with [Administrator Setting] - [Network Setting] - [NIC Setting] - [JSP Setting] on the machine.
The default value is "30081" and "30082". Usually, you do not need to change the value.
When [JSP Setting] is set to [ON] and [Authentication Setting] is set to [Invalid], you can use Job Centro.
[SNMP Setting]
Set up SNMP in [Administrator Setting] - [Network Setting] - [NIC Setting] - [SNMP Setting] on the machine.
When both [SNMP Setting] and [SNMP v1/v2c(IP)] are set to [ON], you can use Job Centro.
For details about the [TCP/IP Setting], [JSP Setting], and [SNMP Setting] of the image controller, refer to NIC Setting: Setting the Machine Network Information, TCP/IP Setting, JSP Setting, and SNMP Setting.