Home Settings and AdjustmentsFusing Refresh Setting: Setting Interval and Time for Automatic Refresh Operation

Fusing Refresh Setting: Setting Interval and Time for Automatic Refresh Operation

Set the interval and time for the fusing refresh operation when automatically and periodically performed.

  1. Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.

  2. Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Expert Adjustment], [Process Adjustment], and [Fusing Refresh Setting] in sequence.

  3. Select a desired refresh interval and refresh time.

    • Select [OFF] if the automatic refresh operation is not desired.

    • With [Normal] selected, the refresh interval for A4 or 8.5 11 paper of 136 g/m2 to 176 g/m2 / 37 lb Bond to 47 lb Bond is roughly estimated as about every 2,000 sheets.

  4. Press [OK] to complete the setting.

    • To cancel the change, press [Cancel]. In either case, the screen returns to the [Process Adjustment Menu] screen.