Adjustment Flow when changing the screen
When you change the screen, perform the following density adjustment.
Tips
This adjustment is the same as the adjustment when the machine was introduced (setup).
If you use Package Color Auto Adj., this machine automatically makes the adjustments in step 2 below and after.
To use Package Color Auto Adj., install Intelligent Quality Optimizer IQ-501. For details, refer to Package Color Auto Adj..
With RU optional unit (Relay Unit RU-518) mounted
Screen selection
In response to the setting (assignment) change of the screen, select the screen to be used.
Auto Gamma Adjustment
This automatically adjusts the density reproducibility of the whole paper to be output.
Density Balance Auto. Adjustment / Density Balance Adjustment
Color density manual control
Set the Periodical Adj. Execution of Basic Setting to ON, and perform Color Density Manual Control as needed.
Color Density Control: Basic Setting
Color Density Control: Color Density Manual Control
To use special paper or increase the accuracy of the automatic adjustment, Each Paper Type Color Adj. is recommended. For details, refer to Color Density Control: Each Paper Type Color Adjustment.
Case in which the RU optional unit (Relay Unit RU-518) is not mounted