Paper Size Available for Use
Paper trays | Available sizes | |
|---|---|---|
Main Body Tray | Standard: SRA3 Custom: Widthwise 182 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 7.17" to 12.76", Lengthwise 5.47" to 18.23" Tab paper: A4T Detectable standard sizes can be switched as follows.*3 •A5 •SRA3 •8.5 Other than the above mentioned, the following standard sizes can be switched when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •B4 | |
Paper Feeder Unit PF-709 | Standard: SRA3 Custom: Widthwise 182 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 7.17" to 12.76", Lengthwise 5.47" to 18.23" Using small size guides: Min. Widthwise 95 mm, Lengthwise 139 mm / Widthwise 3.74", Lengthwise 5.47" Tab paper: A4T Detectable standard sizes can be switched as follows.*3 •A5 •SRA3 •8.5 Other than the above mentioned, the following standard sizes can be switched when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •B4 | |
Large Capacity Unit LU-411 | Standard: A4 Custom: Widthwise 250 mm to 314 mm, Lengthwise 176 mm to 229 mm / Widthwise 9.84" to 12.36", Lengthwise 6.93" to 9.02" Tab paper: A4T | |
Large Capacity Unit LU-412 | Standard: SRA3 Custom: Widthwise 203 mm to 324 mm, Lengthwise 195 mm to 483 mm / Widthwise 7.99" to 12.76", Lengthwise 7.68" to 19.02" Tab paper: A4T | |
Multi Bypass Tray Unit MB-507 | Standard: SRA3 Custom: Widthwise 100 mm to 324 mm, Lengthwise 148 mm to 483 mm / Widthwise 3.94" to 12.76", Lengthwise 5.83" to 19.02" Tab paper: A4T Detectable standard sizes can be switched as follows.*3 •A5 •SRA4 •8.5 Other than the above mentioned, the following standard sizes can be switched when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •(B4 | |
Post Inserter PI-502 (equipped in Finisher FS-532 as option) | Upper tray | Standard: A4 Custom: Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 297 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 11.69" Detectable standard sizes can be switched as follows.*3 •A5 •A4 •8.5 The 3rd option above mentioned changes as follows when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •B5 |
Lower tray | Standard: A3 Custom: Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 488 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.21" Detectable standard sizes can be switched as follows.*3 •A5 •SRA4 •8.5 The 4th option above mentioned changes as follows when the machine is set to use K sizes in the Administrator Setting provided on the [UTILITY] screen. •(B4 | |
*1: B series is set to JIS or ISO standard sizes as the default setting. This setting depends on the destination. For JIS/ISO switching, contact your service representative.
*2: Selection of K sizes can be enabled in the Administrator Setting provided on the [UTILITY] screen. For details, refer to K Size: Selecting Whether or Not to Use K Size Paper.
*3: For details about how to switch [Detect Size Setting], refer to Paper Setting: Setting Paper for Tray.
Equipment | Available sizes | |
|---|---|---|
Main Body | Standard: SRA3 Custom: Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 19.02" Tab paper: A4T | |
Finisher FS-532 | Secondary (sub) tray | Standard: A3 Custom: Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 19.02" Tab paper (only with the tab side ahead in output direction) |
Primary (main) tray (non-Staple) | Standard: A3 Custom: Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 19.02" Tab paper (only with the tab side ahead in output direction) Straight only: 13 | |
Primary (main) tray (Staple) | Standard: SRA3 Custom: Widthwise 203 mm to 324 mm, Lengthwise 139 mm to 483 mm / Widthwise 7.99" to 12.76" *, Lengthwise 5.47" to 19.02" *: Max. 320 mm / 12.60'' in length for parallel staple at the rear corner. Tab paper (only with the tab side ahead in output direction) | |
Punch Kit PK-522 mounted | •2 holes Standard: A3 •3 holes Standard: A3 •4 holes Standard: A3 | |
Saddle Stitcher SD-510 mounted | •Fold & Staple Standard: A3 Custom: Widthwise 120 mm to 324 mm, Lengthwise 240 mm to 483 mm / Widthwise 4.72" to 12.76", Lengthwise 9.45" to 19.02" •Multi Half-Fold Standard: A3 Custom: Widthwise 120 mm to 324 mm, Lengthwise 240 mm to 483 mm / Widthwise 4.72" to 12.76", Lengthwise 9.45" to 19.02" •Multi Tri-Fold A4 | |
Z-Folding Unit ZU-608 | Punch function | •2 holes Standard: A3 •3 holes Standard: A3 •4 holes Standard: A3 |
Fold function | A3 | |
Multi Puncher GP-501 | Punch: 8.5 Bypass: Widthwise 95 mm to 330 mm, Lengthwise 139 mm to 488 mm / Widthwise 3.74" to 12.99", Lengthwise 5.47" to 19.21" | |
Auto Ring Binder GP-502 | Standard: 8.5 Tab Paper: 8.5 Bypass: Widthwise 95 mm to 330 mm, Lengthwise 139 mm to 488 mm / Widthwise 3.74" to 12.99", Lengthwise 5.47" to 19.21" | |
Output Tray OT-507 | Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 18.23" | |