NIC Setting Menu: Configuring the Network Information of the Controller

TCP/IP Settings

This screen allows you to configure settings to connect the machine to a TCP/IP environment and use it.

The IP address can be checked and its acquisition method can be set, the DNS server can be set in the current operating environment, and the IPsec setting can be made based on the safety communication technology as follows.

TCP/IP Settings

ON, OFF

IPv4 Settings

IP Application Method *¹

Manual Input, Auto Input

Manual Input

IP Address

0.0.0.0 (0 to 255)

Subnet Mask

0.0.0.0 (0 to 255)

Default Gateway

0.0.0.0 (0 to 255)

Auto Input

DHCP Setting

ON, OFF

BOOTP Setting

ON, OFF

ARP/PING Setting

ON, OFF

AUTO IP Setting

ON, OFF

IPv6 Settings

ON, OFF *²

Auto IPv6 Settings

ON, OFF *³

DHCPv6 Setting

ON, OFF

Global Address

0000:0000:0000:0000:0000:

0000:0000:0000 (1 to 39 bytes)

Prefix Length

1 to 128 (0)

Link Local Address

fe80: xxxx (where, "xxxx" is the Mac address)

Gateway Address

0000:0000:0000:0000:0000:

0000:0000:0000 (1 to 39 bytes) ^*6

DNS Host

DNS Host Name

Up to 63 one-byte characters can be used.

Dynamic DNS Setting

Enable, Disable

DNS Domain

Domain Name Auto Obtain

Enable, Disable

Search Domain Name Auto

Enable, Disable

DNS Default Domain Name

Up to 251 one-byte characters can be used. *⁸

DNS Search Domain Name 1

Up to 251 one-byte characters can be used. *⁸

DNS Search Domain Name 2

Up to 251 one-byte characters can be used. *⁸

DNS Search Domain Name 3

Up to 251 one-byte characters can be used. *⁸

DNS Server Settings (IPv4)

DNS Server Auto Setting

Enable, Disable

Primary DNS Server

0.0.0.0 (0 to 255)

Secondary DNS Server 1

0.0.0.0 (0 to 255)

Secondary DNS Server 2

0.0.0.0 (0 to 255)

DNS Server Settings (IPv6)

DNS Server Auto Setting

Enable, Disable

Primary DNS Server

0000:0000:0000:0000:0000:

0000:0000:0000 (1 to 39 bytes)

Secondary DNS Server 1

0000:0000:0000:0000:0000:

0000:0000:0000 (1 to 39 bytes)

Secondary DNS Server 2

0000:0000:0000:0000:0000:

0000:0000:0000 (1 to 39 bytes)

IPsec Setting/IPsec Settings

IKE Settings

IKEv1 Settings

Encryption Algorithm

DES-CBC, 3DES-CBC, AES-CBC

AES Key Length Settings *⁴

ON, OFF

128, 192, 256, 128 and 192, 192 and 256, All

Authentication Algorithm

MD5, SHA-1, SHA-2

SHA-2 Key Length Settings *⁵

ON, OFF

256, 384, 512, 256 and 384, 384 and 512, All

Diffie-Hellman Group

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24

Key Valid Time

600 to 604800 (28800) (sec.)

Negotiation Mode

Main Mode, Aggressive Mode

IKEv2 Settings

Encryption Algorithm

DES-CBC, 3DES-CBC, AES-CBC

AES Key Length Settings *⁴

ON, OFF

128, 192, 256, 128 and 192, 192 and 256, All

Authentication Algorithm

MD5, SHA-1, SHA-2, AES-XCBC

SHA-2 Key Length Settings *⁵

ON, OFF

256, 384, 512, 256 and 384, 384 and 512, All

Diffie-Hellman Group

Priority 1

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24

Priority 2

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF

Priority 3

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF

Priority 4

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF

Key Valid Time

600 to 604800 (28800) (sec.)

IPsec SA Settings

Group 1 to Group 10

ON, OFF

Group Name

Up to 10 one-byte characters can be used.

Encapsulation Mode

Tunnel Mode, Transport Mode

Security Protocol

AH, ESP

Key Exchange Method

IKEv1, IKEv2, Manual Key

Authentication Method

Pre-Shared Key, Digital Signature

Local Authentication Method

Pre-Shared Key, Digital Signature

Peer Authentication Method

Pre-Shared Key, Digital Signature, Pre-Shared Key/Digital Signature

ESN

Enable, Disable

Replay Detection

Enable, Disable

ESP Encryption Algorithm

AES_CBC, AES_CTR, DES_CBC, AES-GCM-64, 3DES_CBC, AES-GCM, NULL, ENC-NULL-AES-GMAC

AES-CBC Key Length

128, 192, 256, 128 and 192, 192 and 256, All

AES-CTR Key Length

128, 192, 256, 128 and 192, 192 and 256, All

AES-GCM Key Length

128, 192, 256, 128 and 192, 192 and 256, All

AES-GCM-64 Key Length

128, 192, 256, 128 and 192, 192 and 256, All

ENC-NULL-AES-GMAC Key Len

128, 192, 256, 128 and 192, 192 and 256, All

ESP Auth. Algorithm

MD5, SHA-1, SHA-2, AES-XCBC

SHA-2 Key Length

256, 384, 512, 256 and 384, 384 and 512, All

AH Auth. Algorithm

MD5, SHA-1, SHA-2, AES-GMAC, AES-XCBC

SHA-2 Key Length

256, 384, 512, 256 and 384, 384 and 512, All

AES-GMAC Key Length

128, 192, 256, 128 and 192, 192 and 256, All

Perfect Forward Secrecy

Use, Not Use

Diffie-Hellman Group (IKEv1)

1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, OFF

Diffie-Hellman Group (IKEv2)

Priority 1

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24

Priority 2

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF

Priority 3

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF

Priority 4

Group 1, Group 2, Group 5, Group 14, Group 15, Group 16, Group 17, Group 18, Group 19, Group 20, Group 21, Group 22, Group 23, Group 24, OFF

Encryption Algorithm

DES_CBC, 3DES_CBC, AES_CBC, NULL

AES Key Length

128, 192, 256

Authentication Algorithm

MD5, SHA1, SHA2, AES-XCBC

SHA2 Key Length

256, 384, 512

SA Index

Receive

256 to 4294967295

Send

256 to 4294967295

Common Keys for Enc.

Receive

Send

Common Keys for Auth.

Receive

Send

Destroy Time after Setup

600 to 604800 (3600) (sec.)

Peer

Group 1 to Group 10

ON, OFF

Group Name

Up to 10 one-byte characters can be used.

Set IP Address

Unicast, Subnet Settings, Set Range

Unicast

IPv4 Address Input, IPv6 Address Input

Subnet Settings

IP Address: IPv4 Address Input, IPv6 Address Input

Subnet Mask: IPv4 Address Input, IPv6 Address Input

Set Range

From IP Address: IPv4 Address Input, IPv6 Address Input

To IP Address: IPv4 Address Input, IPv6 Address Input

Pre-Shared Key

ASCII input

Up to 128 one-byte characters can be used.

Hexadecimal input

Up to 256 one-byte characters can be used.

Key-ID Key

Up to 128 one-byte characters can be used.

Protocol Setting

Group 1 to Group 10

ON, OFF

Group Name

Up to 10 one-byte characters can be used.

Protocol Identification Setting

TCP, UDP, ICMP, ICMPv6, Do Not Set

Port Specification Method

Port Number, Set Range

Port Number

Source Port Number: 1 to 65535

Destination Port Number: 1 to 65535

Set Range

Source Port Number/Start Number: 1 to 65535

Source Port Number/End Number: 1 to 65535

Destination Port Number/Start Number: 1 to 65535

Destination Port Number/End Number: 1 to 65535

Message Type (ICMP, ICMPv6)

Echo Request/Reply, Do Not Set

IPsec Setting/Enable Ipsec

ON, OFF

IPsec Policy

Group 1 to Group 10

Group Name

Up to 10 one-byte characters can be used.

Peer

1 to 10 keys

Protocol

1 to 10 keys

IPsec Setting

1 to 10 keys

Communication Type

Send and Receive, Send, Receive

Action

Protected, Allow, Deny, Cancel

Common Settings

Dead Peer Detection

15, 30, 45, 60, 75, 90, 105, 120

Cookies

Enable, Invalid

ICMP Pass Settings

Enable, Invalid

ICMPv6 Pass Settings

Enable, Invalid

Default Action

Allow, Deny

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

IPsec Setting - Communication Check

Check Connection

IP Address

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0 (1 to 39 bytes)

Check Connection

Communication Error Log

Logs 1 to 20

IP Filtering(Permit Access)

Enable, Disable

Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) *¹⁰

Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

IP Filtering(Deny Access)

Enable, Disable

Range 1: Start 0.0.0.0 to End 0.0.0.0 (0 to 255) *¹⁰

Range 2: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 3: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 4: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

Range 5: Start 0.0.0.0 to End 0.0.0.0 (0 to 255)

RAW Port Number

Port 1

1 to 65535 (9100), Do Not Use *⁹

Port 2

1 to 65535 (9112), Do Not Use

Port 3

1 to 65535 (9113), Do Not Use

Port 4

1 to 65535 (9114), Do Not Use

Port 5

1 to 65535 (9115), Do Not Use

Port 6

1 to 65535 (9116), Do Not Use

LLMNR Setting

Enable, Disable

NetWare Settings

Configure the network settings to use this machine by connecting to the Netware environment such as IPX.

1 IPX Setting

ON, OFF

Ethernet Frame Type

Auto Detect, 802.2, 802.3, Ethernet II, 802.3SNAP

2 NetWare Print Settings

ON, OFF

NetWare Print Mode

Pserver, Nprinter/Rprinter

PServer Settings

Print Server Name

Up to 63 one-byte characters can be used.

Print Server Password

Up to 63 one-byte characters can be used.

Polling Interval

1 to 65535 (1) (sec.)

NDS/Bindery Setting

NDS, NDS & Bindery

File Server Name

Up to 47 one-byte characters can be used.

NDS Context Name

Up to 191 one-byte characters can be used.

NDS Tree Name

Up to 63 one-byte characters can be used.

Nprinter/Rprinter Set

Print Server Name

Up to 63 one-byte characters can be used.

Printer Number

0 to 255 (255)

Status

Server Name

Up to 47 one-byte characters can be used.

Queue Name

Up to 127 one-byte characters can be used.

HTTP Server Settings

Select whether or not to use the PageScope Web Connection (PSWC) or configure the IPP print usage environment.

HTTP Server Settings

ON, OFF

PSWC Settings

ON, OFF

IPP Settings

ON, OFF

Accept IPP Jobs

ON, OFF

Support Information

Print Job

ON, OFF

Valid Job

ON, OFF

Cancel Job

ON, OFF

Open Job Attributes

ON, OFF

Open Job

ON, OFF

Open Printer Attributes

ON, OFF

Printer Information

Printer Name

Up to 127 one-byte characters can be used.

Printer Location

Up to 127 one-byte characters can be used.

Printer Information

Up to 127 one-byte characters can be used.

Print URI

Unmodifiable

IPP Authentication Settings

ON, OFF

General Settings

Requesting-user-name, basic, digest

User Name

user

Up to 20 one-byte characters can be used.

Password

pass

Up to 20 one-byte characters can be used.

realm

IPP

Up to 127 one-byte characters can be used.

FTP Settings

Configure an environment of usage for FTP transmission (such as Scan to FTP) or usage of FTP server functionality provided to this machine.

FTP TX Settings

The scanned original data can be sent to the FTP server. The settings described in this section are always required if you want to use Scan to FTP.

ON, OFF

Proxy Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Proxy Server Port Number

1 to 65535 (21)

PASV Mode

Enable, Disable

Connection Timeout

5 to 300 (60) (sec.)

FTP Server Settings

This machine can be used as an FTP Server, and it can be linked to an application that operates as the FPT client.

ON, OFF

Rejected Commands

Allow, PASV/EPSV, PORT/EPRT

Enhanced PORT Command Security

Enable, Disable

SMB Settings

Configure an environment of usage for SMB (Server Message Block), such as Scan to SMB.

Client Settings

The scanned original data can be sent to the shared folder. The settings described in this section are always required if you want to use Scan to SMB.

ON, OFF

SMB Authentication Setting *⁷

NTLMv1, NTLMv2, NTLMv1/NTLMv2, Kerberos

Kerberos Authentication Failure Setting

Use NTLM V1/V2, Do Not Use NTLM

User Authentication (NTML)

ON, OFF

DFS Setting

ON, OFF

Single Sign-On Settings

Default Domain Name

Up to 64 one-byte characters can be used.

SMB Sever Settings

Use this machine as an SMB Server, and set the SMB Printing and SMB File Sharing.

ON, OFF

SMB Sever Common Settings

SMB Host Name

Up to 15 one-byte characters can be used.

Work Group

WORKGROUP

Up to 15 one-byte characters can be used.

SMB Authentication Protocol

SMB1.0, SMB1.0/SMB2.0

SMB Signature Setting

Invalid, Only When Required, Necessary

SMB Print Setting

ON, OFF

Print Service Name

PRO_1100

Up to 12 one-byte characters can be used.

WINS/NetBIOS Settings

Set this item to use the WIN Server.

ON, OFF

Auto Setting

Enable, Disable

WINS Server Address 1

0.0.0.0 (0 to 255)

WINS Server Address 2

0.0.0.0 (0 to 255)

Node Type Setting

B Node, P Node, M Node, H Node

Direct Hosting Setting

Specify whether to use the Direct Hosting SMB Service.

ON, OFF

LDAP Settings

Register and set the LDAP Server, and set the destination search from the Active Directory.

Enabling LDAP

Set whether to use the LDAP Server for destination search.

ON, OFF

Setting Up LDAP

Set the LDAP Server address and others.

Max. Search Results

5 to 100 (100)

Timeout

5 to 300 (60) (sec.)

Initial Setting for Search Details

Name

OR, AND, START WITH, ENDS WITH

E-mail

OR, AND, START WITH, ENDS WITH

Dial Number

OR, AND, START WITH, ENDS WITH

Last Name

OR, AND, START WITH, ENDS WITH

First Name

OR, AND, START WITH, ENDS WITH

City

OR, AND, START WITH, ENDS WITH

Company Name

OR, AND, START WITH, ENDS WITH

Department

OR, AND, START WITH, ENDS WITH

Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Search Base

Up to 255 one-byte characters can be used.

SSL Setting

ON, OFF

Port Number

1-65535 (389)

Port Number (SSL)

1 to 65535 (636)

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Authentication Type

Anonymous, Simple, Digest-MD5, GSS-SPNEGO, NTML v1, NTML v2

Select Sever Auth.Method

Current Setting, Dynamic Auth. Use

Referral Setting

ON, OFF

Login Name

Up to 255 one-byte characters can be used.

Password

Up to 128 one-byte characters can be used.

Domain Name

Up to 64 one-byte characters can be used.

Check Connection

―

All Reset Setting

Yes, No

E-mail Settings

Configure the settings to send and receive E-mails (including Scan to E-mail).

E-mail TX (SMTP)

Set the E-mail transmission from this machine. The setting is required to use the Scan to E-mail.

ON, OFF

SMTP Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Binary Division

ON, OFF

Divided Mail Size

100 to 15000 (500) (step: 100) (K byte)

Connection Timeout

30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.)

Server Capacity

0 to 100 (M bytes) (0)

Specify "0" to make it unlimited.

SSL/TLS Settings

SMTP over SSL, Start TLS, OFF

Port No.

1-65535 (25)

Port Number (SSL)

1 to 65535 (465)

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Detail Settings

SMTP Authentication

ON, OFF

User ID

Up to 255 one-byte characters can be used.

Password

Up to 128 one-byte characters can be used.

Domain Name

Up to 253 one-byte characters can be used.

Authentication Setting

Use Settings, Use User Authentication

POP before SMTP Authentication

ON, OFF

POP before SMTP Time

0 to 60 (0)

E-Mail Rx (POP)

Set the E-mail reception from this machine.

ON, OFF

POP Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Connection Timeout

30, 60, 90, 120, 150, 180, 210, 240, 270, 300 (sec.)

SSL Setting

ON, OFF

Port No.

1-65535 (110)

Port Number (SSL)

1 to 65535 (995)

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Login Name

Up to 63 one-byte characters can be used.

Password

Up to 15 one-byte characters can be used.

APOP Authentication

ON, OFF

S/MIME Communication Setting

Use, Not Use

Digital Signature

Do not add signature, Always add signature

Digital Signature Type

SHA-1, SHA-256

SNMP Settings

Configure the settings to acquire machine information or monitor the machine by using Simple Network Management Protocol (SNMP).

SNMP Settings

ON, OFF

SNMP v1/v2c (IP)

ON, OFF

SNMP v3 (IP)

ON, OFF

SNMP v1 (IPX)

ON, OFF

UDP Port Number

1 to 65535 (161)

SNMP V1/V2C Settings

Read Community Name Settings

public

Up to 15 one-byte characters can be used.

Write Setting

Enable, Disable

Write Community Name Settings

private

Up to 15 one-byte characters can be used.

SNMP V3 Settings

Context Name Settings

Up to 63 one-byte characters can be used.

Discovery User Permission

ON, OFF

Discovery User Name Set

public

Up to 32 one-byte characters can be used. *¹¹

Read User Name Setting

initial

Up to 32 one-byte characters can be used. *¹¹

Security Level

OFF, auth-password,

auth-password/priv-password

Password Setting

Read auth

AuthPassword

8 to 32 one-byte characters can be used.

Read priv

PrivPassword

8 to 32 one-byte characters can be used.

Write User Name Setting

restrict

Up to 32 one-byte characters can be used. *¹¹

Security Level

OFF, auth-password,

auth-password/priv-password

Password Setting

Write auth

8 to 32 one-byte characters can be used.

MAC Address (colons ":" excluded)

Write priv

8 to 32 one-byte characters can be used.

MAC Address (colons ":" excluded)

Encryption Algorithm

DES, AES-128

Authentication Algorithm

MD5, SHA-1

TRAP Setting

Allow, Restrict

TRAP Setting When Authentication Failed

Enable, Invalid

AppleTalk Settings

Configure the AppleTalk operation environment.

AppleTalk Settings

ON, OFF

Printer Name

Up to 31 one-byte characters can be used.

Zone Name

*

Up to 31 one-byte characters can be used.

Current Zone

Unmodifiable

Bonjour Setting

In use on Mac OS, configure an environment of usage for Bonjour.

Bonjour Setting

ON, OFF

Bonjour Name

Up to 63 one-byte characters can be used.

The machine name may have been displayed as the default value.

TCP Socket Settings

Specifies whether to enable functions like a communication with the TWAIN driver (TCP Socket settings) and like tray information in the PageScope Web Connection related to Flash Player(TCP Socket(ASCII Mode)).

1 TCP Socket

ON, OFF

Use SSL/TLS

ON, OFF

Port Number

1-65535 (59158)

Port Number (SSL/TLS)

1 to 65535 (59159)

2 TCP Socket (ASCII Mode)

ON, OFF

Port Number (ASCII Mode)

1 to 65535 (59160)

WebDAV Settings

Configure an environment of usage for WebDAV transmission (such as Scan to WebDAV) or usage of WebDAV server functionality provided to this machine.

WebDAV Client Settings

The scanned original data can be sent to the WebDAV server. The settings described in this section are always required if you want to use the Scan to WebDAV.

ON, OFF

Proxy Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Proxy Server Port Number

1-65535 (8080)

User Name

Up to 63 one-byte characters can be used.

Password

Up to 63 one-byte characters can be used.

Chunk Transmission

ON, OFF

Connection Timeout

5 to 300 (60) (sec.)

Server Auth. Character Code

UTF-8, Windows Code Pages

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

WebDAV Server Settings

This machine can be used as a WebDAV Server, and it can be linked to an application that operates as the WebDAV client.

ON, OFF

SSL Setting

Non-SSL Only, SSL Only, SSL/Non-SSL

Password Setting

Password Setting

sysadm

You can enter up to 64 one-byte characters.

Initial Password

DPWS Settings

Configure the usage environment of Web service function (Devices Profile for Web Services or DPWS).

DPWS Common Settings

This screen allows you to configure settings to detect the machine via Web service.

Friendly Name

Up to 62 one-byte characters can be used.

Publication Service

Enable, Invalid

SSL Setting

ON, OFF

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

DPWS Extension Settings

Configure this setting to use the proxy server and to print or scan data by Web services.

1 Enable Proxy

ON, OFF

2 Register Proxy

Proxy 1 to 3

Host Name

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

File Path

Up to 255 one-byte characters can be used.

SSL Setting

ON, OFF

Port Number

1 to 65535 (80)

Printer Setting

Configure this setting to print data via Web service.

ON, OFF

Printer Name

Up to 63 one-byte characters can be used.

Printer Location

Up to 63 one-byte characters can be used.

Printer Information

Up to 63 one-byte characters can be used.

Scanner Settings

Configure this setting to scan data via Web service.

ON, OFF

Scanner Name

Up to 63 one-byte characters can be used.

Scanner Location

Up to 63 one-byte characters can be used.

Scanner Information

Up to 63 one-byte characters can be used.

Connection Timeout

30 to 300 (120) (sec.)

SSDP Settings

Configure this setting to use the SSDP (Simple Service Discovery Protocol) and to find the service that the machine can provide from software and other services on the network.

SSDP Settings

ON, OFF

Multicast TTL Settings

1 to 10 (1)

Detail Settings

Device Setting

Check the MAC address of this machine, and set the network speed.

MAC Address

LLTD Setting

Enable, Disable

Network Speed

Auto (10M/100Mbps), Auto (10M/100M/1Gbps), 10Mbps Half-Duplex, 10Mbps Full-Duplex, 100Mbps Half-Duplex, 100Mbps Full-Duplex, 1Gbps Full-Duplex

Time Adjustment Setting

Configure the settings to automatically adjust the date and time of this machine, using the NTP (Network Protocol Server).

Auto IPv6 Retrieval

ON, OFF

NTP Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Port Number

1 to 65535 (123)

Set Date

Auto Time Adjustment

ON, OFF

Polling Interval

1 to 240 (24) (hrs)

Status Notification Setting

Configure this setting to send a notification to the specified destination when an alert such as paper jam is issued by this machine.

1 Register Notification Address - IP Addresses 1 to 5

ON, OFF

Host Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Port Number

1 to 65535 (162)

Community Name

public

Up to 15 one-byte characters can be used.

Notification Items

ON, OFF

Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full

1 Register Notification Address - IPX Address

ON, OFF

Network Address

00: 00: 00: 00

Node Address

00: 00: 00: 00: 00: 00

Community Name

public

Up to 15 one-byte characters can be used.

Notification Items

ON, OFF

Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full

1 Register Notification Address - E-mail Addresses 1 to 5

ON, OFF

Edit E-mail Address

Up to 256 one-byte characters can be used.

Notification Items

ON, OFF

Service Call, Paper JAM, Replenish Paper Tray, Replenish Toner, PM Call, Replace Staples, Finisher Tray Full, Empty Hole-Punch Scrap Box, Waste Toner Box Full, Empty Staple Scrap Box, Bind Parts Supply, HDD (Pre-RIP/Form/Scan Data) Almost Full, HDD (Copy/RIPed Data) Almost Full

PING Confirmation

Check the connection between this machine and a destination device by using the ping function.

PING TX Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Check Connection

SLP Setting

Configure this setting to enable the Service Location Protocol (SLP), and to control this machine by the TWAIN driver via the network.

Enable, Disable

LPD Setting

Enable the Line Printer Daemon (LPD) to allow LPR printing.

Enable, Disable

Cert. Verifi. Setting

Specify to validate the certificate of the destination device. *⁹

ON, OFF

Use SSL Version

Set the SSL version to use. *⁹

SSL3.0, TLS1.0, TLS1.1, TLS1.2

AD Auth. LDAP over SSL

Specify to use LDAP over SSL with Active Directory authentication.

AD Auth. LDAP over SSL

Enable, Invalid

AD Auth. LDAP over SSL; Port No.

1 to 65535 (636)

Network Setting Clear

Return the Network Settings of this machine to the factory default.

Start

IEEE802.1X Authentication Setting

Configure IEEE802.1X authentication settings.

IEEE802.1X Authentication Settings

ON, OFF

Auth. Status

Reset Job Settings

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

IWS Settings *¹²

Set the operating environment of IWS (Internal Web Server) function.

Using IWS function enables to transfer a print data conversion application to the machine and use the print data conversion function and other functions.

IWS Settings

ON, OFF

Port Number (Web Server)

1 to 65535 (8090)

Port Number (Application Installation)

1 to 65535 (8091)

Connect IWS Apps to Network

Allow, Restrict

Remote Panel Settings

Set the remote panel operation of this machine.

Client Settings

ON, OFF

Port No.

1 to 65535 (443)

Connection Timeout

20 to 300 (60) (sec.)

Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Certificate Verification Level Settings

Expiration Date

Confirm, Do Not Confirm

Key Usage

Confirm, Do Not Confirm

Chain

Confirm, Do Not Confirm

Expiration Date Confirmation

Confirm, Do Not Confirm

CN

Confirm, Do Not Confirm

Synchronize WebDAV Client Setting

Individual Settings

Proxy Server Address

Host Name Input

Up to 253 one-byte characters can be used. *⁸

IPv4 Address Input

0.0.0.0 (0 to 255)

Ipv6 Address Input

0: 0: 0: 0: 0: 0: 0: 0

Proxy Server Port Number

1-65535 (8080)

User Name

Up to 63 one-byte characters can be used.

Password

Up to 63 one-byte characters can be used.

Launch Remote Panel from vCare

Allow, Restrict

JSP Setting

Configure an environment of usage for the a JAVA-based communication application software like Color Centro, Job Centro.

JSP Setting

ON, OFF

SSL Setting

Non-SSL Only, SSL Only, SSL/Non-SSL

Authentication Setting

Enable, Invalid

Login Name

Unknown

Up to 8 one-byte characters can be used.

Password

change it

Up to 8 one-byte characters can be used.

Port Number

30081-30090 (30081)

Port Number (SSL)

30081 to 30090 (30082)

Hot Folder Setting

Set the operating environment of Hot Folder in order to print PDF and TIFF files directly.

1 Hot Folder Setting

Hot Folder Function

Enable, Invalid

Authentication

Synchronize, Do Not Synchronize

Print Order

File Copy Start Order, File Copy Completion Order

2 User Setting

001 to 100

User Name

The User Name can be specified using up to 20 one-byte or two-byte characters.

Password

Up to 20 one-byte characters can be used.

3 Delete All Printed Files

Yes, No