List of Setting Items

[01 Address Edit]

Add or delete a destination. Also, edit registered information of a destination.

-

[02 E-mail Title Setting]

Register up to 5 E-mail subjects.

-

[03 E-mail Text Setting]

Register up to 5 E-mail texts.

-

[01 System Setting]

[01 Language Setting]

Select the language used in the touch panel and voice messages.

Language used in LCD: Japanese, Hangul

Taiwan, Chinese

English, French, German, Italian, Spanish

Language in voice message: English, Japanese, OFF

[02 Unit Setting]

Select the unit of measurement for numeric values to be displayed on the touch panel.

mm, Inch (Decimal Point), Inch (Fraction)

[03 Paper Tray Setting]

[01 Paper Setting]

Register or delete the paper settings. Up to 500 can be registered.

Paper Type, Profile Name, Paper Size, Weight, Colored Paper, Punch, Both Sides Adjust, Expert Adjustment, Curl Adjustment
, Import, Export

[02 Auto Tray Selection Setting]

Select the tray to take over the feeding when the tray currently used becomes out of paper. This function is called Auto Tray Switch (ATS). When selecting multiple trays for ATS, determine the priority of the trays.

ATS/APS Switch: Trays 1 to 5, Bypass

Tray Priority: Order of priority for selected trays

[03 Type for Auto Paper]

Specify paper conditions that enable a tray to be selected in Auto Paper (APS).

Paper conditions to be specified here are Paper Type, Weight, Punch, Tab Paper, and Colored Paper.

Paper Type:Plain, Fine, Book/News, Embossed, Blank Insert

Weight: 40-49 g/m2 / 10-13 lb Bond, 50-54 g/m2 / 14-15 lb Bond, 55-61 g/m2 / 16-17 lb Bond, 62-74 g/m2 / 18-19 lb Bond, 75-80 g/m2 / 20-21 lb Bond, 81-91 g/m2 / 22-24 lb Bond, 92-105 g/m2 / 25-28 lb Bond, 106-135 g/m2 / 29-36 lb Bond, 136-162 g/m2 / 37-43 lb Bond, 163-216 g/m2 / 44-57 lb Bond, 217-256 g/m2 / 58-68 lb Bond, 257-300 g/m2 / 69-81 lb Bond, 301-350 g/m2 / 82-93 lb Bond

Punch: Allow, Restrict

Tab Paper: Allow, Restrict

Colored Paper: White, Blue, Goldenrod, Gray, Green, Ivory, Orange, Pink, Red, Yellow, Cream, ClearWhite, Others, User Color

[04 Reset Setting]

[01 Auto Reset Setting]

The screen selected as the default screen returns after a certain period of inactivity. Select the time interval to activate this function.

OFF, 60 seconds, 120 seconds, 180 seconds, 240 seconds, 300 seconds, 360 seconds, 420 seconds, 480 seconds, 540 seconds

[02 Job Reset Setting]

Specify whether or not to initialize the setting currently specified when the machine takes it that the user has changed, or original document is loaded into the ADF. And select the settings to be initialized each time a single job has been completed.

Change User: ON, OFF

ADF Original Direction: Reset, Not Reset

Reset Button Function: Initialize, Full Auto

Mode Memory Auto Call: ON, OFF

Finisher Mode when Full Auto: Offset Sort, Offset Group, Sort, Group, Staple Sort, Fold & Staple, Face Up, Face Down

Initial by Key Counter Insert: ON, OFF

Status Hold When Auto Reset: Not Keep, Keep

Next Job Staple Setting: Release, Do Not Release

Original Set/Bind Direction: Release, Do Not Release

[05 Default Screen Setting]

Select the screen to be displayed when the sub power switch is turned on or Auto Reset is activated.

MACHINE, JOB LIST/Hold Job, JOB LIST/Reserved Job , COPY

[06 Set Zoom Ratio Setting]

Modify predefined fixed ratios. Also, preset frequently used magnification ratios.

Fixed (Enlarge/Reduce): 8

Set Zoom Ratio: 3

[07 Power Save Setting]

[01 Power Save Function Setting]
Select the time to activate Auto Low Power and Auto Shut OFF. Also select either Auto Low Power or Auto Shut OFF to be activated when Power Save is pressed on the control panel.

You can also select the condition of Auto Wake-up to activate the machine when a print job is received during Auto Shut OFF.

Auto Low Power: --- min., 1 min., 3 min., 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min., 240 min.
Auto Shut OFF: --- min., 1 min., 3 min., 5 min., 10 min., 15 min, 30 min., 60 min., 90 min., 120 min., 240 min
Power Save Function: Auto Low Power, Auto Shut OFF

Auto Wake-up Cond.: All Jobs

[02 ErP Setting]

Automatically turn off the main power switch when the sub power switch is turned off, or when Auto Shut OFF or Auto Low Power has been active for a certain time.

Do Not Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, 72 Hours

[03 Main Power Auto OFF Setting]

Select whether to automatically turn OFF the main power switch after the sub power switch is turned OFF and the main body is completely cooled down.

If turned ON, the above function is set.

ON, OFF

[08 Date/Time Setting]

Set the current date and time, the daylight-saving time, and the time difference.

Setting Time

Daylight Saving Time: OFF, ON (1 to 150 min.)

Time Zone

[09 Operation/Info. Sound Setting]

[01 Volume Setting]

Specify whether to turn the operation sound and speaker sound on or off, and also set the volume when they are turned on.

Operation Sound: ON, OFF,

1 (Small) to 8 (Big)

Speaker sound: ON, OFF; 1 (Small) to 10 (Big)

[02 Info. Sound Item Setting]

Specify each items provided for information sound and voice message.

Repeat Number Setting

Info. Sound Repeat Number: 1 time, 2 times, 3 times

Voice Repeat Number: 1 time, 2 times, 3 times

Notice Set for Machine Stop

Paper JAM: Voice, Info. Sound, OFF

Paper Empty: Voice, Info. Sound, OFF

Paper Differ: Voice, Info. Sound, OFF

Replenish Toner: Voice, Info. Sound, OFF

Service Call: Info. Sound, OFF

Output full: Info. Sound, OFF

Other Notification Setting

Job Complete Pre-notice: Voice, OFF

Stop Button Acceptance: Voice, OFF

Sample Print Completion: Voice, OFF

Finisher Front Door Alert: Voice, OFF

Other Info. Sound Setting

For System Starting: Info. Sound, OFF

For Print Job Receiving: Info. Sound, OFF

[10 Key Response Time]

Select the time interval to get the response from the machine when a key is pressed on the touch panel.

Normal, 0.5 seconds, 1 second, 2 seconds, 3 seconds

[11 Shortcut Key Register]

[01 Application (Copy)]

Select shortcut keys to be displayed under [Application] on the [COPY] screen. Up to 4 keys can be selected.

Insert Sheet, Combine, Booklet, Adhesive binding, Book Copy, Non-Image Area Erase, Image Repeat, Frame Center Erase, Image Centering, Page Margin, Stamp, Full Image Area, Negative/Positive Reverse

[02 Application (Scan)]

[SCAN] screen - Select shortcut keys to be displayed under [Application] on the Scan Setting screen. Up to 2 keys can be selected.

Book Copy, Non-Image Area Erase, Frame Center Erase, Full Image Area, Annotation, Negative/Positive Reverse

[03 Quality Adj. (Copy)]

Select shortcut keys to be displayed under [Quality Adj.] on the [COPY] screen. Up to 4 keys can be selected.

Copy Density, Background Removal, Sharpness, Contrast, Image Distinction Level, Screen Pattern

[04 Quality Adj. (Scan)]

Select shortcut keys to be displayed under [Quality Adj.] on the Scan Setting screen of [SCAN] screen. Up to 4 keys can be selected.

Scan Density, Background Removal, Red, Green, Blue, Sharpness, Contrast , Image Distinction Level

[05 Quality Adj. (Store)]

Select shortcut keys to be displayed under [Quality Adj.] on the [STORE] screen. Up to 4 keys can be selected.

Scan Density, Background Removal, Sharpness, Contrast, Image Distinction Level

[06 Quality Adj. Area Setting]

[COPY] screen, [SCAN] screen - Select either shortcut keys or density setting to be displayed under [Quality Adj.] on the [STORE] screen.

Shortcut Display, Density Setting Display

[07 Output Setting]

Select shortcut keys to be displayed under [Output Setting] on the [COPY] screen. Up to 4 keys can be selected.

Z-Fold, Multi Half-Fold, Multi Tri-Fold, Fold & Staple, Staple, Punch, Offset Sort, Sort, Offset Group, Group, Ring Bind

[12 Service Port Device Setting]

Specify whether or not to use a service port device, and select the keyboard type if the service port device is used.

Service Port Device: ON, OFF

Keyboard Type: EN65, EN104, JP101, JP106, JP109

[13 Mouse Setting]

Select whether or not to use the Wheel Booster function and Cursor Auto Scrolling function, respectively, for when the mouse is connected.

Wheel Booster Setting: ON, OFF

When using this function, set List Scrolling Speed and Value Scrolling Speed.

Cursor Auto Scrolling Set.: ON, OFF

When using this function, set cursor speed, cancel sensitivity, and cursor prior return position, and cursor prior destination.

[02 Initial Setting]

[01 Copy Initial Setting]

Specify the initial settings to be restored when Reset is pressed.

Copy Initial Setting: Original Setting, Quality Adj., Zoom, Auto Zoom, Simplex/Duplex, Output Setting, Paper tray selection, Auto Paper, Image Rotation OFF, ADF, Store Setting

[02 Scan Initial Setting]

Specify the initial settings to be restored when Reset is pressed.

Scan Initial Setting: Original Setting, Quality Adj., Zoom, Application, Color, Color Space, Scan Size, Resolution (dpi), Simplex/Duplex, Default Server, ADF

[03 Store Initial Setting]

Specify the initial settings to be restored when Reset is pressed.

Store Initial Setting: Store Setting, Original Setting, Quality Adjustment, Zoom, Application, Scan Size, Simplex/Duplex, ADF

[03 Common Setting]

[One Shot Message Indication Time]

Select the time span to display a shot message in the message area of the touch panel.

3 seconds, 5 seconds

[Offset by Job Unit]

Specify whether or not to offset the output sheets by job. Also specify the number of jobs to be offset when selecting ON for this function.

ON, OFF (Selecting ON: Offset Job Number, Initial Value: 1)

[Continuation Print]

Specify whether or not to output multiple reserve jobs in succession without stopping the machine at a job break.

Copy ON, Copy OFF, Printer ON, Printer OFF

[Dark Tone Control]

In order to adjust the quality of output image, select whether to automatically decrease the copying speed (Quality), prioritize the copying speed, or disable the control over the tone.

OFF, Quality, Performance

[Icon Display for Dark Tone Control]

Select whether or not to display the Dark Tone icon while the Dark Tone Control function is enabled.

This function is available only when [Quality] or [Performance] is selected at [Dark Tone Control].

ON, OFF

[Dash Length (Page Stamp)]

Select the length of the dash to be used in a style of [Page No.] in [Stamp].

Long, Short

[Center Crop Mark Trim Margin]

Specify the space between the center crop mark and image area (center crop mark trim margin).

0.0 mm to 20.0 mm (default: 1.0)

[Schedule Cross Axis Unit (Default)]

Select the unit of horizontal axis on the [Schedule] screen.

Timetable, Time Frame (m), Sheet Volume

[Hold Job Status after Output (Default)]

Select the default value to delete or save the data of hold job after outputting.

Delete, Save

[Offset Output Mode]

Specify how to offset the output sets.

Change Out Pos., Change Out Position + Partition Paper (Tray 1 to Tray 5, Bypass, PI 1, PI 2), Partition Paper Insertion (Tray 1 to Tray 5, Bypass, PI 1, PI2), Stop Print

[Needless Tab Paper Exit]

Specify whether or not to automatically discharge the oddments of tabbed sheets loaded in a tray as a set for copy job.

ON, OFF

[Remaining Memory (Measurement Unit)]

Select the unit of displaying the remaining memory.

%, GB

[Remaining Memory (Warning)]

Select the percentage at which to give warning when the remaining memory is low.

5% or Less, 10% or Less

[[Proof Copy] 1 Set/1st Sheet Selection]

If it is turned ON, the confirmation window is opened and you are asked to output one confirmation copy or to output only its first page when the [Proof Copy] is pressed.

ON, OFF

[Temp. Down/Up Control before Print]

Select whether to rotate the fusing roller before printing starts, in order to print at the appropriate temperature.

ON, OFF

[04 Copy Setting]

[Auto Select of Booklet Copy]

Set the machine to automatically select the Booklet mode when Fold & Staple or Multi Half Fold mode is selected.

Auto Select, Manual Select

[Orig. Glass Auto Size Select]

Specify whether or not to automatically select the same size of copy paper as the original when placed on the original glass.

ON, OFF

[ADF Auto Size Select]

Specify whether or not to automatically select the same size of copy paper as the original when placed on the ADF.

ON, OFF

[Auto Zoom (Original Glass)]

Specify whether or not to automatically set an appropriate magnification ratio to correspond to the selected paper size when detecting the original size placed on the original glass.

ON, OFF

[Auto Zoom (ADF)]

Specify whether or not to automatically set an appropriate magnification ratio to correspond to the selected paper size when detecting the original size placed on the ADF.

ON, OFF

[Non-Image Area Erase]

Specify the condition of Non-Image Area Erase function.

ON, APS/AMS, Except Orig. Glass (1:1)

[ADF Frame Erase]

Set to erase the frame when copying in ADF mode.

None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm

[Interruption Suspend Setting]

Set the timing to interrupt the current job when pressing Interrupt while copying.

Stop Immediately, WhenCurrentComp.

[Printer Prohibit Timer]

Set the time interval to suspend the print job via PC after the last operation of touch keys.

OFF, 15 seconds, 30 seconds, 60 seconds, 90 seconds

[Orig./Out Bind Direction Set]

Set whether or not to conform the bind direction in Output Setting with that specified in Original Setting.

ON, OFF

[Specify Default Tray APS OFF]

Specify the tray to be automatically selected when APS (Auto Paper) is canceled.

APS Tray, Tray 1 to Tray 5, Bypass

(Selectable tray options vary depending on the option configuration. )

[Scan Stop by Pull Out Tray]

Set whether or not to stop the scanning operation if any tray is pulled out.

ON, OFF

[Mode Hold After Scan Upload]

Select whether or not to keep the scan conditions after the scanned data is uploaded.

Keep, Not Keep

[05 Scan Setting]

[File Type Default E-mail]

Select the default value of [File Type] for Scan to E-mail.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[File Type Default HDD]

Select the default value of [File Type] for Scan to HDD.

This is not available on this machine.

-

[File Type Default FTP]

Select the default value of [File Type] for Scan to FTP.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[File Type Default SMB]

Select the default value of [File Type] for Scan to SMB.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[File Type Default WebDAV ]

Select the default value of [File Type] for Scan to WebDAV.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[File Type Default USB]

Select the default value of [File Type] for Scan to USB.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[Default Address]

Select the default value (destination type) of the [SCAN] screen.

E-mail, HDD, FTP, SMB, WebDAV, USB Drive

[Compress Method Color/Gray]

Select the default value of the level to compress data.

High Comp., Standard, Low Comp.

[06 Printer Setting]

[01 Outline Process]

Select the Outline Process for printing.

Text Thinning: Weak+, Weak, Normal, Strong, Strong+

Halftone Text Enhancement: Weak+, Normal, Strong+

FD Lead Edge Density Adjustment: -5 to 0

FD Rear Edge Density Adjustment: 0 to +5

[02 Select Prior Output Tray]

Select the output tray for the jobs for which the output tray is specified as "Auto". This menu item is to be displayed and allowed on the machine mounted with Finisher FS-532.

Main Tray, Sub Tray

[07 Image Quality Setting]

[01 Original Density Shift]

Adjust the original density shift amount in each original image quality mode.

Text/Photo (print): -3 to +3

Text/Photo (photo): -3 to +3

Photo (print): -3 to +3

Photo (photo): -3 to +3

Text: -3 to +3

Dot Matrix: -3 to +3

Map: -3 to +3

(All values are set to 0 by default for each original mode. )

[02 ACS Adjustment]

Adjust the automatic color detection function.

Adjustment Range: -2 to +2

[03 Image Density Selection]

Change the setting range of density that can be set by Quality Adjustment.

(Lighter) -5 to +1 (Darker), Standard

[08 Change Password]

Change the user password previously registered with user authentication.

Entry of a new password

[09 Tandem Setting]

This option is displayed when the Partner MFP is installed as a tandem machine, and the setting can be configured.

[01 Tandem Machine One Time Data Read]

Set the Partner MFP to receive all the data transmitted from This MFP before starting to print.

ON, OFF

[02 Tandem Machine Wait/Proof]

Set whether to transmit the data to the Partner MFP when This MFP starts scanning the data for proof copying.

Allow, Restrict

[03 Distribution Recovery]

Set the tandem-connected machines to perform the job distribution again for print quantity remaining on one machine when the other has already finished with its assignment.

ON, OFF

[04 Tandem IP Address Setting]

Specify the IP address of the Partner MFP.

-

[01 System Setting]

[01 Power Save Setting]

[01 Power Save Function Setting]
Select the time to activate Auto Low Power and Auto Shut OFF. Also select either Auto Low Power or Auto Shut OFF to be activated when Power Save is pressed on the control panel.

You can also select the condition of Auto Wake-up to activate the machine when a print job is received during Auto Shut OFF.

Auto Low Power: --- min., 1 min., 3 min., 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min., 240 min.

Auto Shut OFF: --- min., 1 min., 3 min., 5 min., 10 min., 15 min., 30 min., 60 min., 90 min., 120 min., 240 min.

Power Save Function: Auto Low Power, Auto Shut OFF

Auto Wake-up Cond.: All Jobs

[02 ErP Setting]

Automatically turn off the main power switch when the sub power switch is turned off, or when Auto Shut OFF or Auto Low Power has been active for a certain time.

Do Not Switch, 12 Hours, 24 Hours, 36 Hours, 48 Hours, 60 Hours, 72 Hours

[03 Main Power Auto OFF Setting]

Select whether to automatically turn OFF the main power switch after the sub power switch is turned OFF and the main body is completely cooled down.

If turned ON, the above function is set.

ON, OFF

[02 Date/Time Setting]

Set the current date and time, the daylight-saving time, and the time difference.

Setting Time

Daylight Saving Time: OFF, ON (1 to 150 min.)

Time Zone

[03 Weekly Timer Setting]

[01 Weekly Timer On/Off Setting]

Specify whether or not to use the Weekly Timer function.

Weekly Timer ON, Weekly Timer OFF

[02 Time Setting]

Set the ON/OFF times in hours and minutes.

-

[03 Date Setting]

Set the ON/OFF condition of the machine for a given day of a given month.

-

[04 Select Time for Power Save]

Set the machine to turn off and then on during the lunch break.

ON, OFF

[05 Password Non-Business Hours]

Set a password to use the machine by turning on the power temporarily while the machine is in off condition due to the Weekly Timer function.

0000 (4 digits)

[04 Restrict User Access]

[01 Lock/Delete Mode Memory]

Lock or unlock the copy program, scan program, and stored program, that have been registered by the program function so that those programs are not erased.

If locked, the program cannot be overwritten.

[01 Copy Mode Memory]

Lock or unlock a copy program registered using Mode Memory not to or to allow deleting, or delete a copy program.

-

[02 Scan Mode Memory]

Lock or unlock a scan program registered by using Mode Memory not to or to allow deleting, or delete a scan program.

-

[03 Store Mode Memory]

Lock or unlock the stored program, that has been registered by the program function, so that it cannot be or can be erased.

-

[02 Change Restrict Setting]

Select whether to allow or to restrict to add, change, or delete a destination, and to change the registered magnifications.

Change Address Registration: Allow, Restrict

Change Set Zoom: Allow, Restrict

[03 Scan Restriction Setting]

Select whether to allow or to restrict to select or enter a destination for each destination type.

E-mail: Allow, Restrict

HDD: Allow, Restrict

FTP: Allow, Restrict

SMB: Allow, Restrict

WebDAV: Allow, Restrict

USB Flash Drive: Allow, Restrict

Manual Setting: Allow, Restrict

[04 Function Usage Restriction]

Specify whether or not to allow the use of various functions.

Sample Print: Allow, Restrict

USB Direct Print: Allow, Restrict

[05 Expert Adjustment]

[01 Auto Background Dens. Adj.]

Change the density level to be applied when [Auto] is selected for [Background Removal] in [Quality Adj.] on the COPY screen.

Color: -2 to 2 (0)

Black: -2 to 2 (0)

[02 Erase Correction]

[01 Non-Image Area Erase]

Specify the conditions to be applied to the Non-Image Area Erase function.

Erase Outside of Original, ON - APS/AMS Only, Except Orig. Glass (1:1)

[02 Erase Operation Setting]

Set the Erase Mode when erasing the original, and set the original density.

You must select [Erase Outside of Original] in [01 Non-Image Area Erase].

Erase Mode/Orig. Density: Auto

Erase Mode (at automatic cancel): Oblique Erase, Rectangle Erase

Original Density (at automatic cancel): Dark+, Dark, Normal, Light, Light+

[03 ADF Frame Erase]

Set to erase the frame when copying in ADF mode.

None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm

[03 Printer Adjustment]

[01 Restart Timing Adjustment]

Adjust the image position of lead edge in paper feed direction in the printer engine.

Prerequisite:

FD-Mag. Adjustment is completed.

Objects of adjustment:

Side1: All Trays Offset, Restart Timing (Tray 1 to Tray 5), Restart Timing (Bypass)

Side2: Restart Timing (Tray 1 to Tray 5), Restart Timing (Bypass)

Adjustment Range:

(Lower) -30 to +30 (Higher)

(1 step=0.1 mm)

[02 Centering Adjustment]

Adjust the image position in the crosswise direction of the printer engine.

Prerequisite:

CD-Mag. Adjustment is completed.

Adjustment Range:

(Front) -64 to +63 (Back)

(1 step=0.1 mm)

[03 FD-Mag. Adjustment]

Adjust the magnification in paper feed direction in the printer engine.

Objects of adjustment:

Side1: Printer FD-Mag.

Adjustment Range:

(Short) -10 to +10 (Long)

(1 step = 0.05%)

Objects of adjustment:

Side2: Tray 1 to Tray 5, Bypass Tray

Adjustment Range:

(Short) -10 to 0 (Long)

(1 step = 0.05%)

[04 CD-Mag. Adjustment]

Adjust the magnification in crosswise direction in the printer engine.

Objects of adjustment:

Side1: Printer CD-Magnification Adjustment

Adjustment Range:

(Short) -10 to +10 (Long)

(1 step = 0.05%)

Objects of adjustment:

Side2: Tray 1 to Tray 5, Bypass Tray

Adjustment Range:

(Short) -10 to 0 (Long)

(1 step = 0.05%)

[05 Lead Edge Erase Adjustment]

Adjust the amount of image to be erased from the edge of the printed sheet.

Objects of adjustment:

Erase Amount

Adjustment Range:

-20 (Short) to +40 (Long)

(1 step=0.1 mm)

[06 Registration Loop Adj.]

Adjust the paper loop amount in registration roller section.

Objects of adjustment:

Side1

Adjustment Range:

(Short) -12 to +5 (Long)

(1 step = 1.0 mm)

Objects of adjustment:

Side1 Thick, Side1 Thin

Adjustment Range:

(Short) -9 to +5 (Long)

(1 step = 1.0 mm)

Objects of adjustment:

Side2, Side2 Thick, Side2 Thin

Adjustment Range:

(Short) -10 to +10 (Long)

(1 step = 1.0 mm)

[07 Pre-registration Adj.]

Adjust the paper loop amount in pre-registration roller section of the trays.

Objects of adjustment:

Not Thin Paper, Thin Paper

Tray1 to Tray5, Bypass Tray

Adjustment Range:

(Short) -10 to +10 (Long)

(1 step = 1.0 mm)

[08 Print Job JAM Setting]

Set whether or not to stop the machine as a paper jam when a mis-centering is detected. And set whether or not to display a message indicating the cause of the JAM when the machine stops as JAM.

Mis-centering JAM Setting: Detect, Not Detect

JAM Identification Display: Display, Not Display

[04 Finisher Adjustment] (Finisher FS-532)

This menu item is to be displayed and allowed on the machine mounted with Finisher FS-532.

[01 Staple Finisher Adjustment]

[01 Staple Finisher(Main) Adj.]

[01 Staple Position Adjustment]

Adjust 2 position staple pitch and corner staple positions in staple finisher.

Objects of adjustment:

2 Position Pitch (120 mm), 2 Position Pitch (140 mm), 2 Position Pitch (165 mm), Rear Diagonal

Adjustment Range:

-5 (Narrow) to +5 (Wide)

(1 step = 1.0 mm)

Objects of adjustment:

Rear Parallel, Front Parallel

Adjustment Range:

-3 (Narrow) to +3 (Wide)

(1 step = 1.0 mm)

[02 Staple Paper Width Adj.]

Adjust the board alignment width of the staples in the staple finisher.

Objects of adjustment:

Offset for All Size, SRA3 , A3 , SRA4 , A4 , A4 , A5 , B4 , B5 , 8K , 16K , 12 18 , 11 17 , 9 11 , 8.5 11 , 8.5 11 , 8.5 14 , 8 13 , 5.5 8.5 , 16K , Custom (380 to 488 mm, Custom (220 to 379 mm), Custom (139 to 219 mm), SRA4 *

* SRA4 is not displayed by default. To use this setting, please contact your service representative.

Adjustment Range:

-20 (Wide) to +20 (Narrow)

(1 step=0.1 mm)

[03 FD Alignment Plate Adj.]

Adjust the vertical alignment fitting for staples in the staple finisher.

Objects of adjustment:

Offset for All Size, A4 , B5 , A5 , 8.5 11 , 16K , 9 11 , 5.5 8.5 , Custom (139 to 230 mm)

Adjustment Range:

-50 (Wide) to +50 (Narrow)

(1 step=0.1 mm)

[04 Exit Guide Paper Width Adj.]

Adjust the exit guide alignment pitch to be used by the staple finisher.

Make adjustment if output paper stack on main tray is uneven in straight delivery.

Objects of adjustment:

Offset for All Size, SRA3 , A3 , SRA4 , A4 , A4 , A5 , B4 , B5 , 8K , 16K , 12 18 , 11 17 , 9 11 , 8.5 11 , 8.5 11 , 8.5 14 , 8 13 , B5 , Postcard, 5.5 8.5 , 16K , Custom (380 to 488 mm), Custom (220 to 379 mm), Custom (139 to 219 mm), SRA4 *

* SRA4 is not displayed by default. To use this setting, please contact your service representative.

Adjustment Range:

-50 (Wide) to +50 (Narrow)

(1 step=0.1 mm)

[05 Rewind Paddle Descent Adj.]

Adjust rewind paddle descent.

Objects of adjustment:

Offset for All Size, SRA3 , A3 , SRA4 , A4 , A4 , A5 , B4 , B5 , 8K , 16K , 12 18 , 11 17 , 9 11 , 8.5 11 , 8.5 11 , 8.5 14 , 8 13 , 5.5 8.5 , 16K , Custom (380 to 488 mm, Custom (220 to 379 mm), Custom (139 to 219 mm), SRA4 *

* SRA4 is not displayed by default. To use this setting, please contact your service representative.

Adjustment Range:

-10 (Little) to +10 (Much)

(1 step = 0.2 mm)

[06 Rewind Function Operation]

Select operation for the rewind paddle.

Auto, ON, OFF

[07 Upper Gripper Operation]

Select the upper gripper operation for main tray outlet.

Auto, ON, OFF

[08 Output Alignment Operation]

Select operation for output alignment.

Auto, ON, OFF

[02 Staple Finisher(Fold) Adj.]

This menu item is to be displayed and become configurable on Finisher FS-532 mounted with Saddle Stitcher SD-510.

[01 Fold&Staple Pitch Adjustment]

Adjust staple pitch in Saddle Stitcher SD-510. Make this adjustment if staple pitch is not within the allowance range.

Objects of adjustment:

Offset for All Size, SRA3 , 12 18 , A3 , 11 17 , 8K , B4 , SRA4 , 8.5 14 , 8.5 11 , B5 , A4 , 16K , 8 13 , Custom (380 to 488 mm), Custom (240 to 379 mm)

Adjustment Range:

-300 (Narrow) to +300 (Wide)

(1 step=0.1 mm)

[02 Fold&Staple Paper Width Adj.]

Adjust pitch of alignment plate in Saddle Stitcher SD-510 if half-folded or multi tri-folded sheets show misalignment.

Objects of adjustment:

Offset for All Size, SRA3 , 12 18 , A3 , 11 17 , 8K , B4 , SRA4 , 8.5 14 , 8.5 11 , B5 , A4 , 16K , 8 13 , Custom (380 to 488 mm), Custom (240 to 379 mm)

Adjustment Range:

-50 (Narrow) to +50 (Wide)

(1 step=0.1 mm)

[03 Fold & Staple Staple Position]

Adjust staple position in Saddle Stitcher SD-510.

Objects of adjustment:

Offset for All Size, SRA3 , 12 18 , A3 , 11 17 , 8K , B4 , SRA4 , 8.5 14 , 8.5 11 , B5 , A4 , 16K , 8 13 , Custom (380 to 488 mm), Custom (240 to 379 mm)

Adjustment Range:

Top face of output paper: -50 (Extend) to +50 (Shorten)

(1 step=0.1 mm)

[04 Fold & Staple Fold Position]

Adjust half-fold position of fold & staple function in Saddle Stitcher SD-510. Make this adjustment if half-fold position is not within the specified range.

Objects of adjustment:

Offset for All Size, SRA3 , 12 18 , A3 , 11 17 , 8K , B4 , SRA4 , 8.5 14 , 8.5 11 , B5 , A4 , 16K , 8 13 , Custom (380 to 488 mm), Custom (240 to 379 mm)

Adjustment Range:

Top face of output paper: -50 (Extend) to +50 (Shorten)

(1 step=0.1 mm)

[05 Half-Fold Fold Position Adj.]

Adjust half-fold position of fold function in Saddle Stitcher SD-510.

Objects of adjustment:

Offset for All Size, SRA3 , 12 18 , A3 , 11 17 , 8K , B4 , SRA4 , 8.5 14 , 8.5 11 , B5 , A4 , 16K , 8 13 , Custom (380 to 488 mm), Custom (240 to 379 mm)

Adjustment Range:

Top face of output paper: -50 (Extend) to +50 (Shorten)

(1 step=0.1 mm)

[06 Tri-Fold Adjustment]

[01 Tri-Fold Position Adjustment]

Adjust Fold 1 and Fold 2 positions for multi tri-folding in Saddle Stitcher SD-510.

Make this adjustment if each fold position for tri-folding is not within the allowance range.

Objects of adjustment:

8.5 11 , A4 , 16K

Adjustment Range:

Fold 1: -50 (Extend) to +50 (Shorten)

(1 step=0.1 mm)

Fold 2: -50 (Shorten) to +50 (Extend)

(1 step=0.1 mm)

[02 Double Fold Plate Adjustment]

Adjust double fold plate in saddle stitcher.

Deepen in case of wide shift in bunch of the Fold 2.

Objects of adjustment:

8.5 11 , A4 , 16K

Adjustment Range:

-50 (Shallow) to +50 (Deep)

(1 step=0.1 mm)

[07 Half-Fold Strength Adj.]

To adjust the opening of booklets, increase the roller pressure time.

* You cannot adjust the strength to fold booklets.

* Long pressure time causes reduced productivity.

Adjustment Range:

(Additional time) 0 to +10

(1 step = 1 sec)

[03 Staple Finisher (Punch) Adj.]

This menu item is to be displayed and configurable on Finisher FS-532 mounted with Punch Kit PK-522.

[01 Vertical Position Adj.(CD)]

Adjust the misalignment in center positions of paper and punch holes for each paper size.

Objects of adjustment:

Offset for All Size, A3 , A4 , A4 , SRA4 , A5 , B4 , B5 , 8K , 16K , 16K , 8.5 14 , 8.5 11 , 8.5 11 , 12 18 , 11 17 , 8 13 , 5.5 8.5 , 9 11 , B5

Adjustment Range:

-50 (Forward) to +50 (Backward)

(1 step=0.1 mm)

[02 Horizontal Position Adj.(FD)]

Adjust the distance between the edge of the printed paper and the center of punch holes.

Objects of adjustment:

Offset for All Size, A3 , A4 , A4 , SRA4 , A5 , B4 , B5 , 8K , 16K , 16K , 8.5 14 , 8.5 11 , 8.5 11 , 12 18 , 11 17 , 8 13 , 5.5 8.5 , 9 11 , B5

Adjustment Range:

-50 (Far) to +50 (Close)

(1 step=0.1 mm)

[03 Registration Adjustment]

If the punch position is not parallel to the paper edge, control the paper curl and wrinkle by adjusting the paper loop amount of the registration roller.

Objects of adjustment:

Back on Top Output, ADU Feed

Adjustment Range:

-50 (Short) to +50 (Long)

(1 step=0.1 mm)

[04 Staple Finisher (PI) Adj.]

This menu item is to be displayed and configurable on Finisher FS-532 mounted with PostInserter PI-502.

[01 PI Registration Adjustment]

When paper fed from the upper or lower tray of PostInserter PI-502 has skew or wrinkle, or causes paper jam, adjust the paper loop of the registration roller.

Objects of adjustment:

PI Upper Tray, PI Lower Tray

Adjustment Range:

-5 (Short) to +5 (Long)

(1 step = 1.0 mm)

[04 Finisher Adjustment] (Z Folding Unit ZU-608 mounted)

This menu item is to be displayed and become configurable on Finisher FS-532 mounted with Z-Folding Unit ZU-608.

[02 Z-Folding Unit Adjustment]

[01 Z-Fold Position Adj.]

Adjust the fold positions for Z-folding.

Adjust Fold 1 and Fold 2 in this order.

Objects of adjustment:

Offset for All Size, A3 , B4 , 11 17 , 8.5 14 , 8K

Adjustment Range:

Fold 1: (Shorten) -128 to +127 (Extend)

(1 step = 0.1 mm)

Fold 2: (Shorten) -128 to +127 (Extend)

(1 step = 0.1 mm)

[02 Punch Adjustment]

[01 Vertical Position Adj.(CD)]

Adjust depth of punch position in Z-Folding Unit ZU-608

Objects of adjustment:

Offset for All Size, A3 , B4 , SRA4 , A4 , A4 , B5 , B5 , A5 , 11 17 , 8.5 14 , 8.5 11 , 8.5 11 , 5.5 8.5 , 5.5 8.5 , 8 13 , 8K , 16K , 16K , 9 11

Adjustment Range:

(Forward) -50 to +50 (Backward)

(1 step=0.1 mm)

[02 Horizontal Position Adj.(FD)]

Adjust punch position for transport direction in Z-Folding Unit ZU-608.

Adjustment Range:

(Close) -50 to +50 (Far)

(1 step = 0.1 mm)

[03 Punch Registration Loop Adjustment]

If punch position of punch unit is not parallel to paper edge in Z-Folding Unit ZU-608, control paper curl and wrinkle by adjusting paper loop of registration roller.

Objects of adjustment:

Back on Top Output, ADU Feed

Adjustment Range:

(Short) -20 to +20 (Long)

(1 step = 0.8 mm)

[05 Scan Adjustment]

Make adjustments related to the scanning function.

[01 Restart Timing Adjustment]

Adjust the scan starting position when scanning the original on the original glass.

Prerequisite: FD-Mag. Adjustment is completed.

Objects of adjustment:

Scanning device of the original glass

Adjustment Range:

-30 (Image Slow) to +30 (Image Fast)

(1 step=0.1 mm)

[02 Centering Adjustment]

Adjust the image position in the crosswise direction when scanning the original on the original glass.

Prerequisite: Printer Centering Adjustment is completed.

Objects of adjustment:

Orig. Glass Centering

Adjustment Range:

-57 (Back) to +57 (Front)

(1 step=0.1 mm)

[03 FD-Mag. Adjustment]

Adjust the magnification in feed direction when scanning the original on the original glass.

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

Scanning device of the original glass

Adjustment Range:

990 (Short) to 1010 (Long)

(1 step = x 0.001)

[04 CD-Mag. Adjustment]

Adjust the crosswise direction when scanning the original on the original glass.

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

Scanning device of the original glass

Adjustment Range:

990 (Short) to 1010 (Long)

(1 step = x 0.001)

[06 Quality Adjustment]

Adjust the image quality.

[01 IDC Sensor Adjustment]

Adjust the IDC sensor using a scanner.

Screen 1, Screen 2, Stochastic

[02 Highlight Automatic Adj.]

Change the printer gamma curve automatically to adjust the gradation and background density in highlights.

Screen 1

Screen 2

Stochastic

[03 Highlight Adjustment]

Change the printer gamma curve to adjust the gradation and background density in highlights.

Screen 1

Screen 2

Stochastic

Adjustment Range: -128 (lighter) to +127 (darker)

[04 Custom Screen]

Select screens to be used as Screen 1, Screen 2, and Stochastic, respectively.

Screen 1: Dot210, Dot170, Dot140, Dot120, Dot105, Dot85

Screen 2: Dot210, Dot170, Dot140, Dot120, Dot105, Dot85

Stochastic: FM1, FM2, FM3

[05 Controller Image Comp. Set]

Make this setting to smooth the jagged outlines of the text or line images.

Gradation Priority, Resolution Priority

[06 Tone Curve Each Tag Setting]

Select whether or not to allow tone curve adjustment for each tag (image, text/graphic).

Execute Each Tag Adj., Do Not Execute Adjustment

[07 Density Balance Adjustment]

[01 Density Balance Auto. Adj.]

Perform the density balance adjustment using the scan function.

Output Chart

Start

[02 Density Balance Chart Output]

Output the chart for density balance adjustment.

Objects of adjustment:

Colorimeter

i1-iSisXL: 16-point measurement

i1-Pro/i1-Pro2: 3-point measurement

[03 Density Balance Data Reg/Del]

Load the colorimetric data, or manually register the data on the machine.

[07 ADF Adjustment]

[01 ADF Original Stop Pos. Adj.]

Adjust the position to start scanning on the ADF and the image position in the crosswise direction.

Prerequisite: FD-Mag. Adjustment should be completed before adjusting the position to start scanning. Printer Centering Adjustment should be completed before adjusting the image position.

Objects of adjustment:

Restart Timing (Front), Restart Timing (Back)

Adjustment Range:

-40 (Image Fast) to +40 (Image Slow)

(1 step=0.1 mm)

Objects of adjustment:

Centering (Front), Centering (Back)

Adjustment Range:

-44 (Image Forward) to +44 (Image Backward)

(1 step=0.1 mm)

[02 ADF Orig. Stop Pos. Auto]

Automatically adjust the position to start scanning on the ADF and the image position in crosswise direction.

Prerequisite: FD-Mag. Adjustment should be completed before adjusting the position to start scanning. Printer Centering Adjustment should be completed before adjusting the image position.

Objects of adjustment:

Restart Timing (Front), Restart Timing (Back)

Centering (Front), Centering (Back)

[03 FD-Mag. Adjustment]

Adjust the magnification in paper feed direction when scanning on the ADF

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

ADF

Adjustment Range:

-20 (Short) to +20 (Long)
(1 step = 0.1%)

[04 FD-Mag. Auto Adjustment]

Adjust the magnification in paper feed direction when scanning on the ADF

Adjustment Range:

ADF

[05 Line Detection (Front Side)]

Set the detection level of white lines on Side 1, warning display, and whether or not to stop the scanning of the original using ADF.

Detection Level: Strict, Medium, Mild, OFF

Warning Display: Icon + Warning Display, Icon, Warning Display

Scan Prohibit Set.:Allow, Restrict

[06 Line Detection (Back Side)]

Set the detection level of white lines on Side 2, warning display, and whether or not to stop the scanning of the original using ADF.

Detection Level: Strict, Medium, Mild, OFF

Warning Display: Icon + Warning Display, Icon, Warning Display

Scan Prohibit Set.:Allow, Restrict

[07 Home Read Position Adj (Back)]

Adjust the home position of the shading axis to correct an image error due to a dirt on the shading axis in the back side of the ADF.

Adjustment Range:

-4 to +4

(1 step = 1)

[08 FD-Mag. Adjustment (Back)]

Adjust the magnification in the paper feed direction on the back side when scanning on the ADF.

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

ADF

Adjustment Range:

(Short) -20 to +20 (Long)

(1 step = 0.1%)

[09 FD-Mag. Auto Adj. (Back)]

Automatically adjust the magnification in the paper feed direction on the back side when scanning on the ADF.

Objects of adjustment:

ADF

Start

[10 Main Scan Dir. Zoom (Back)]

Adjust the magnification in the crosswise direction on the back side when scanning on the ADF.

Prerequisite: Printer FD-Mag. Adjustment is completed.

Objects of adjustment:

ADF

Adjustment Range:

(Short) -10 to +10 (Long)

(1 step = 0.1%)

[11 Main Scan Dir. Zoom Auto (Back)]

Automatically adjust the magnification in the crosswise direction on the back side when scanning on the ADF.

Objects of adjustment:

ADF

Start

[08 Corner Staple (Back) Angle]

Select between diagonal and parallel stapling on the left corner.

Diagonal, Parallel

[06 List/Counter]

Output the user setting list and the audit log report. Also, collectively save the data mentioned above on the USB flash drive connected to the USB port.

User Management List, Use Management List, Font Pattern List, Audit Log Report

[07 Size Setting]

Specify the settings related to paper sizes of the originals to be placed on the original glass or ADF, or of the paper placed in the post inserter.

[01 Detect Orig. Size on Glass]

Table 1, Table 2

[02 K Size]

Specify whether or not to use the K sizes such as 8K and 16K.

ON, OFF

[03 ADF/Orig. Glass Priority]

Specify the standard sizes which cannot be detectable from the ADF or original glass.

8.5 14 /8 13

[04 A4 Tab Width Setting]

Select the tab width of A4-size tab paper.

12.7 mm, 15.0 mm

[08 Annotation Setting]

Register, edit or delete the Annotation setting.

[09 Operation Screen Customize]

[01 Font Weight Setting]

Select the font weight for the screen.

Standard, Bold

[02 Copy Screen Customize Set]

Change the layout of setting items displayed on the upper half of the [COPY] screen.

-

[03 Scan Screen Customize Set]

Change the layout of setting items that are displayed on the Scan Settings screen.

-

[04 Store Screen Customize Set]

Change the layout of setting items displayed on the [STORE] screen.

-

[05 Machine Function Key Setting]

Change the layout of function keys displayed on the [MACHINE] screen.

-

[02 Administrator Registration]

Register the name, extension number, and e-mail address of the administrator. The administrator name and extension number are always displayed in the upper-right corner of the [UTILITY] screen.

Admin. Name Setting (up to 20 characters), Extension No. Setting (up to 8 digits), E-mail Address Setting

[03 Scan Address Register]

[01 Address Edit]

Add or delete a destination. Also, edit registered information of a destination.

-

[02 E-mail Title Setting]

Register up to 5 E-mail subjects.

-

[03 E-mail Text Setting]

Register up to 5 E-mail texts.

-

[04 User Auth./Account Track]

Specify whether or not to use the user authentication and account track functions. You can also specify or change the conditions in authentication.

[1 General Settings]

Specify the authentication method of the user authentication and account track.

User Authentication: ON, OFF, ON (External Serv), ON (MFP)

Public User: Allow (with Login), Restrict

Account Track: ON, OFF

Account Track Input Method: Account + Password, Password

Synchronize User Auth./Account Auth.: Synchronize, Not Synchronize

Upper Limit Achieve Movement: Stop Immediately, Stop After Print, Warning Only

Number of Counters Assigned for Users: 1 to 999

Ticket Hold Time Setting: 1 minute to 600 minutes

Count Sample Print: ON, OFF

[2 User Authentication Settings]

[1 Administrative Settings]

Specify whether or not to display the user name list on the authentication screen. Also place the default function permissions on users for the authentication by an external server.

User Name List: ON, OFF

Default Function Permission

Copy: Allow, Restrict

Scan: Allow, Restrict

Print: Allow, Restrict

Stored Document Operation: Allow, Restrict

[2 User Registration]

Add, change, or delete entries of users to be allowed in user authentication.

User No., User Name, User Password, E-mail Address, Account Name, Max. Allowance Set, Register Auth. Info., Usable Function (Copy, Scan, Print, Stored Document Operation)

[3 User Counter]

View or reset the count for each user.

-

[3 Account Track Settings]

[1 Account Track Registration]

Change, add, or delete accounts to be tracked.

Account Name, Password, Max. Allowance Set, Usable Function (Copy, Scan, Print, Stored Document Operation)

[2 Account Track Counter]

View or reset the count for each account track.

-

[4 Print without Authentication]

Specify whether to make print function available to users without authentication.

Permit, Prohibit

[6 External Server Settings]

Register an external server, or edit or delete a registered server when ON (External Serv) is selected as the Authentication Method.

-

[8 Auth. Device Settings]

[1 General Settings]

Specify the type of IC card used for entering credentials. Also, specify the authentication method.

IC Card Type Setting: FeliCa, SSFC, FCF, FCF (Campus), Type A, Felica+TypeA, SSFC+TypeA, FCF+TypeA, FCF (Campus)+TypeA

Operation Setting: IC Card Authentication, IC Card + Password Authentication

[9 User/Account Common Setting]

Specify whether or not to display a logout confirmation dialog.

Logout confirmation Display: ON, OFF

[05 Network Setting]

[01 NIC Setting]

Configure various NIC settings.

TCP/IP Settings, Netware Setting, http Server Setting, FTP Setting, SMB Setting, LDAP Setting, E-mail Setting, SNMP Setting, AppleTalk Setting, Bonjour Setting, TCP Socket Setting, WebDAV Setting, DPWS Setting, SSDP Setting, Detail Setting, IEEE802.1X Auth. Settings, IWS Setting, Remote Panel Setting, JSP Setting, Hot Folder Setting

[02 E-mail Initial Setting]

Configure initial settings for e-mail or perform transmitting/receiving test.

Use E-mail System: ON, OFF

Time Zone, Trans (SMTP) Mail Server, SMTP Port Number, Trans Mail Server Timeout, New-arrival Check Interval, Receive Mail Server

Receive Mail Server Types: POP3, IMAP , POP3/IMAP Port Number, Receive Mail Account, Receive Mail Password, E-mail Address for Machine

POP (IMAP) before SMTP Auth.: ON, OFF

SSL Encryption of SMTP: ON, OFF

SSL Encryption of POP(IMAP) : ON, OFF

SMTP Authentication: ON, OFF

SMTP Authentication User ID, SMTP Authentication Password

[03 http Communication Setting]

Configure the http communication settings.

Enable Proxy Server: ON, OFF , Proxy Server Address, Proxy Server Port, Enable SSL, Enable Authentication: ON, OFF, Authentication User Name, Authentication Password

[04 Quick Security Setting]

[01 Quick IP Filtering]

Restrict access to the machine by means of IP address (IPv4/IPv6).

Filtering Method: No Filtering, Sync. IP Address, Sync. Subnet Mask

IPv4 Access Range, IPv6 Access Range

[02 Administrator Password]

Set an administrator password for the machine on which the administrator authentication function is set to OFF. The administrator authentication function is automatically turned ON.

Current Password, New Password, Input Confirmation

[03 Password Rules Setting]

Select whether or not to enable the password rules.

Enable, Disable

[04 WebUtilities Setting]

Select whether or not to use the functionality of Web Utilities.

ON, OFF

[05 PSWC Setting]

Select whether or not to use the PageScope Web Connection function.

Enable, Disable

[06 Security Warning Display]

Select whether or not to display the Security Setting Warning screen.

ON, OFF

[06 Common Setting]

[One Shot Message Indication Time]

Select the time span to display a shot message in the message area of the touch panel.

3 seconds, 5 seconds

[Offset by Job Unit]

Specify whether or not to offset the output sheets by job. Also specify the number of jobs to be offset when selecting ON for this function.

ON, OFF (Selecting ON: Offset Job Number, Initial Value: 1)

[Continuation Print]

Specify whether or not to output multiple reserve jobs in succession without stopping the machine at a job break.

Copy ON, Copy OFF, Printer ON, Printer OFF

[Dark Tone Control]

In order to adjust the quality of output image, select whether to automatically decrease the copying speed (Quality), prioritize the copying speed, or disable the control over the tone.

OFF, Quality, Performance

[Icon Display for Dark Tone Control]

Select whether or not to display the Dark Tone icon while the Dark Tone Control function is enabled.

This function is available only when [Quality] or [Performance] is selected at [Dark Tone Control].

ON, OFF

[Dash Length (Page Stamp)]

Select the length of the dash to be used in a style of [Page No.] in [Stamp].

Long, Short

[Center Crop Mark Trim Margin]

Specify the space between the center crop mark and image area (center crop mark trim margin).

0.0 mm to 20.0 mm (default: 1.0)

[Schedule Cross Axis Unit (Default)]

Select the unit of horizontal axis on the [Schedule] screen.

Timetable, Time Frame (m), Sheet Volume

[Hold Job Status after Output (Default)]

Select the default value to delete or save the data of hold job after outputting.

Delete, Save

[Offset Output Mode]

Specify how to offset the output sets.

Change Out Pos., Change Out Position + Partition Paper (Tray 1 to Tray 5, Bypass, PI 1, PI 2), Partition Paper Insertion (Tray 1 to Tray 5, Bypass, PI 1, PI2), Stop Print

[Needless Tab Paper Exit]

Specify whether or not to automatically discharge the oddments of tabbed sheets loaded in a tray as a set for copy job.

ON, OFF

[Remaining Memory (Measurement Unit)]

Select the unit of displaying the remaining memory.

%, GB

[Remaining Memory (Warning)]

Select the percentage at which to give warning when the remaining memory is low.

5 % or Less, 10 % or Less

[[Proof Copy] 1 Set/1st Sheet Selection]

If it is turned ON, the confirmation window is opened and you are asked to output one confirmation copy or to output only its first page when the [Proof Copy] is pressed.

ON, OFF

[Temp. Down/Up Control before Print]

Select whether to rotate the fusing roller before printing starts, in order to print at the appropriate temperature.

ON, OFF

[07 Copy Setting]

[Auto Select of Booklet Copy]

Set the machine to automatically select the Booklet mode when Fold & Staple or Multi Half Fold mode is selected.

Auto Select, Manual Select

[Orig. Glass Auto Size Select]

Specify whether or not to automatically select the same size of copy paper as the original when placed on the original glass.

ON, OFF

[ADF Auto Size Select]

Specify whether or not to automatically select the same size of copy paper as the original when placed on the ADF.

ON, OFF

[Auto Zoom (Original Glass)]

Specify whether or not to automatically set an appropriate magnification ratio to correspond to the selected paper size when detecting the original size placed on the original glass.

ON, OFF

[Auto Zoom (ADF)]

Specify whether or not to automatically set an appropriate magnification ratio to correspond to the selected paper size when detecting the original size placed on the ADF.

ON, OFF

[Non-Image Area Erase]

Specify the condition of Non-Image Area Erase function.

ON, APS/AMS, Except Orig. Glass (1:1)

[ADF Frame Erase]

Set to erase the frame when copying in ADF mode.

None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm

[Interruption Suspend Setting]

Set the timing to interrupt the current job when pressing Interrupt while copying.

Stop Immediately, WhenCurrentComp.

[Printer Prohibit Timer]

Set the time interval to suspend the print job via PC after the last operation of touch keys.

OFF, 15 seconds, 30 seconds, 60 seconds, 90 seconds

[Orig./Out Bind Direction Set]

Set whether or not to conform the bind direction in Output Setting with that specified in Original Setting.

ON, OFF

[Specify Default Tray APS OFF]

Specify the tray to be automatically selected when APS (Auto Paper) is canceled.

APS Tray, Tray 1 to Tray 5, Bypass

(Selectable tray options vary depending on the option configuration. )

[Scan Stop by Pull Out Tray]

Select whether or not to stop the scanning operation if any tray is pulled out.

ON, OFF

[Mode Hold After Scan Upload]

Select whether or not to keep the scan conditions after the scanned data is uploaded.

Keep, Not Keep

[08 Scan Setting]

[File Type Default E-mail]

Select the default value of [File Type] for Scan to E-mail.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[File Type Default HDD]

Select the default value of [File Type] for Scan to HDD.

This is not available on this machine.

-

[File Type Default FTP]

Select the default value of [File Type] for Scan to FTP.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[File Type Default SMB]

Select the default value of [File Type] for Scan to SMB.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[File Type Default WebDAV ]

Select the default value of [File Type] for Scan to WebDAV.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

 [File Type Default USB]

Select the default value of [File Type] for Scan to USB.

File Type: PDF, PDF/A-1a, PDF/A-1b, CompactPDF, CompactPDF/A-1a, CompactPDF/A-1b, TIFF, XPS, JPEG

Page Settings: Package, Divided

[Default Address]

Select the default value (destination type) of the [SCAN] screen.

E-mail, HDD, FTP, SMB, WebDAV, USB Drive

[Compress Method Color/Gray]

Select the default value of the level to compress data.

High Comp., Standard, Low Comp.

[09 System Connection]

[1 OpenAPI Settings]

Set the OpenAPI information.

Access Setting: Allow, Restrict

SSL/Port Setting

Authentication: ON, OFF, Login Name, Password

Proxy Setting: Port Number (HTTP, HTTPS, FTP), Host Address, User Name, Password

[2 Call Remote Center]

Press [Start] to call your service representative via CS Remote Care.

Start

[10 Security Setting]

[01 Administrator Password]

Change the administrator password.

For details about the default administrator password, refer to the Quick Guide.

[02 HDD Management Setting]

[01 HDD Lock Password]

Change the HDD lock password.

-

[02 Delete Temp. Data Setting]

Specify whether or not to overwrite the temporary image data on the memory, and also the erase mode for deleting temporary data.

Setting Switch: ON, OFF

Erase Mode: Mode 1, Mode 2

[03 Delete All Data Setting]

Select the desired erase mode to delete all the data on the HDD or the non-volatile memory of this machine. Also execute deleting all the data.

Erase Mode: Mode 1 to 8

Execute Deletion

[04 Delete hold Job]

Use this function to delete hold jobs.

-

[05 Delete HDD Job]

Use this function to delete the jobs saved on the HDD.

-

[06 Delete Secure Job]

Use this function to delete secure jobs from the security job box.

―

[07 HDD Restore/Backup]

Make a backup of, or restore the HDD.

[01 HDD ALL Backup]

Create a backup of all the hold job and HDD job saved on the HDD onto an external storage medium connected to the USB port.

Start

[02 HDD ALL Restore]

Restore the backup data created using [HDD ALL Backup].

Start

[03 HDD BOX Backup]

Create a backup of the jobs in the backup folder of the HDD job onto an external medium connected to the USB port.

Start

[04 HDD BOX Restore]

Restore the backup data created using [HDD BOX Backup].

Start

[05 Controller Backup]

Create a backup of setting data saved on the Image Controller onto an external storage medium connected to the USB port.

Start

[06 Controller Restore]

Restore the backup data created using [Controller Backup].

Start

[08 HDD Encryption Setting]

Set whether or not to save all jobs saved on the HDD upon encrypting them, and set the encryption password.

ON, OFF
12345678

[09 HDD Job Auto Delete Period]

Set the time when the jobs on hold are automatically deleted.

Not Delete, 12 hours, 1 day, 2 days, 3 days, 7 days, 30 days

[03 Enhanced Security Mode]

Specify whether or not to activate the Enhanced Security mode.

ON, OFF

[11 OpenAPI Auth. Management]

[1 Restriction Code Settings]

Register/Check the restriction code.

Index, Vendor, Application

[01 Quick IP Filtering]

Restrict access to the machine by means of IP address (IPv4/IPv6).

Filtering Method: No Filtering, Sync. IP Address, Sync. Subnet Mask

IPv4 Access Range, IPv6 Access Range

[02 Administrator Password]

Set an administrator password for the machine on which the administrator authentication function is set to OFF. The administrator authentication function is automatically turned ON.

Current Password, New Password, Input Confirmation

[03 Password Rules Setting]

Select whether or not to enable the password rules.

Enable, Disable

[04 WebUtilities Setting]

Select whether or not to use the functionality of Web Utilities.

ON, OFF

[05 PSWC Setting]

Select whether or not to use the PageScope Web Connection function.

Enable, Disable

[06 Security Warning Display]

Select whether or not to display the Security Setting Warning screen.

Display, Not Display