Installation When Using NetWare
This section describes the settings necessary when using NetWare and the procedure for installing printer drivers for the Windows client.
Network settings
In the [NetWare Settings] for this machine, specify [IPX Setting] and [NetWare Print Mode].
For details about [NetWare Settings] of this machine, refer to NIC Setting: Setting the Machine Network Information.
Enable [IPX Setting] in [NetWare Settings], then set [NetWare Print Mode].
Configuring the Windows client
For the Windows client that uses a printer, install the printer driver using the [Add Printer] Wizard.
Installing the driver requires the administrator privilege.
Insert the Driver CD-ROM into the CD-ROM drive.
Click [Start] and open the [Devices and Printers], [Printers], or [Printers and Faxes] window.
Click [Add printer] or [Install printer].
The [Add Printer] Wizard is displayed.
In the port settings, browse the network and specify the name of the created queue (or NDPS printer name).
From the printer model list, specify the desired folder in the CD-ROM that contains the printer driver.
The available printer drivers are the PCL driver, PS Plug-in driver, and PPD driver.
Follow the instructions on the windows that follow to complete the installation.