Recalling Store Settings
Follow the procedure below to recall jobs that are already stored.
To display the [Store Mode Memory] screen, display the [STORE] screen, and then press Mode Memory on the control panel. When the [MACHINE] or other screen is displayed, the [Store Mode Memory] screen is not displayed.
Position the original.
Press the [STORE] tab.
The [STORE] screen is displayed.
Press Mode Memory on the control panel.
The [Store Mode Memory] screen is displayed.
Press the job number key that you want to recall.
Press [Program Check].
The [Mode Check] screen is displayed. Review the job settings.
The current settings of Print Side, Quality Adjustment and Scan Size are displayed in the left side area of the [Mode Check] screen.
The current settings of Zoom Setting are displayed on the right side of the [Mode Check] screen.
Press [Close] on the [Mode Check] screen.
Press [OK].
The registered save settings are recalled and the [STORE] screen is displayed.
Enter the desired print quantity, then press Start on the control panel.