Home CopyCalling Copy Job Setting

Calling Copy Job Setting

Follow the procedure below to call job settings that are already registered.

  • Be sure to display the [COPY] screen before pressing Mode Memory on the control panel to display the [Mode Memory Mode] screen. The [Mode Memory Mode] screen is not displayed when another screen such as the [MACHINE] screen is displayed.

  1. Position the original.

  2. Press the [COPY] tab to display the [COPY] screen.

  3. Press Mode Memory on the control panel.

    The [Mode Memory Mode] screen is displayed.

  4. Press the job number key that you want to call.

  5. Press [Program Check].

    The [Mode Check] screen is displayed. Review the job settings.

    • The current settings of [Paper Setting], [Original Setting], [Zoom Setting], [Print Side], and [Quality Adjustment] are displayed in the left side area of the [Mode Check] screen. Press [][] at the bottom of the screen to scroll.

    • The current settings of [Output Setting] and [Application] are displayed in the right side area of the [Mode Check] screen. Depending on the settings, [][] are displayed at the bottom of the screen. Press the keys to check the setting.

  6. Press [OK] on the [Mode Check] screen.

    The registered copy conditions are called and the screen returns to the [COPY] screen.

    • Change the settings as required.

  7. Enter the desired print quantity, then press Start on the control panel.