Home CopyMode Check: Reviewing Settings before Print

Mode Check: Reviewing Settings before Print

Before printing, you can display the [Mode Check] screen to check the set copy conditions. This is a convenient and cost effective way for making a large amount of copies.

  1. Position the original.

  2. Set the desired copy conditions from the [COPY] screen.

  3. Press Mode Check on the control panel.

    The [Mode Check] screen is displayed.

  4. Review the job settings.

    • The current settings of [Paper Setting], [Original Setting], [Zoom Setting], [Print Side], and [Quality Adjustment] are displayed in the left side area of the [Mode Check] screen. To switch the display, press [][] at the bottom of the screen.

    • The current settings of [Output Setting] and [Application] are displayed in the right side area of the [Mode Check] screen. To switch the display, press [][] at the bottom of the screen.

  5. After reviewing the settings, press [Close].

    The screen returns to the [COPY] screen.

    • If no setting change is desired, proceed to step 8.

  6. Navigate to the screen of the setting you need to change, and make it as desired.

  7. Return to the [COPY] screen, then press Mode Check on the control panel.

    • Be sure to display the [COPY] screen before you access the [Mode Check] screen by pressing Mode Check.

  8. If no further change is required, press Start on the control panel.

    • You can set the print quantity with the [Mode Check] screen displayed.

    The machine starts printing.