Overview of Sample Print
This function can be used to output an image, which is the same as the image currently being printed, to the secondary (sub) tray of the finisher and to check the quality of the printed image at that time. If the output tray is Output Tray OT-507, a sample image is also output to the same tray.
When an output setting such as [Fold & Staple] or [Staple] is configured, you cannot check the image quality during job output processing, but using this function, you can check the output image quality during job output processing.
If [Sample Print] is set to [Restrict] in Utility Menu, Sample Print is unavailable. Contact your administrator.
Print paper in the current paper tray is used for Sample Print. Paper loaded in another tray cannot be used for Sample Print.
Sample Print is unavailable when the Post Inserter Tray is selected as a paper tray.
Sample Print is unavailable when print paper is tab paper.
Sample Print is unavailable when both sides of the original document or original data are blank.
Sample Print is unavailable when print sheets cannot be ejected to the secondary (sub) tray.
When printing to the secondary (sub) tray, switchover to another secondary (sub) tray may be possible for Sample Print. For details, contact your service representative.
The setting of Sample Print can be changed to output a whole set when making a sample print by pressing [Execute Sample Print] in the upper part of the [MACHINE] screen. For details, contact your service representative.
The output mode is the same as that for output images, excluding output settings.
Specify whether to count sample prints in UTILITY. For details, refer to Authentication Method: Setting the Authentication Conditions.
Sample Print provides the following two methods.
Method | Description |
|---|---|
[Execute Sample Print] | When you want to check the quality of printed image during a print job, press [Execute Sample Print] located in the upper part of the [MACHINE] screen to manually make a sample print. |
[Sample Print Setting] | To set Sample Print in advance, press [Sample Print Set.] located in the lower part of the [MACHINE] screen. With this function set, the machine automatically delivers a sample print in specified cycle during the output job. |
For details about how to operate, refer to Execute Sample Print: Making Sample Print Manually during Output and Settings for Execute Sample Print: Setting Execute Sample Print before Outputting.