Home CopyZ-Fold: Outputting Z-Folded Copies

Z-Fold: Outputting Z-Folded Copies

When Finisher FS-532 is equipped with Z-Folding Unit ZU-608, you can Z-fold paper A3 , B4 , 11 17 , or 8.5 14 to output it.

Z-Fold is available in combination with Punch or Staple.

Z-Fold

Punch + Z-Fold

Z-Fold + Staple + Mixed in Original Setting with Auto Paper activated

  • Number of z-folded sheet: 1 sheet

  • Paper Sizes: A3 , B4 , 11 17 , 8.5 14

  • Paper weight: 64 g/m to 90 g/m / 18 lb Bond to 24 lb Bond

  • Fold type: Z-fold (double-fold for 8.5 14 only)

  • Fold length: A3 : 209 mm / 8.23" or less, B4 : 181 mm / 7.13" or less

  • Z-Fold and Staple modes are available in combination for A3 and A4 mixed, while they cannot be used for B4 and B5 mixed.

  • When using Mixed with Z-Fold, different series of original sizes should not be mixed; otherwise the Z-Fold mode may not function properly.

  • Some plain paper types may cause fold line to shift.

  • Paper cannot be fed from trays specified as any size other than Standard (sizes specified in Detect Size Setting, Custom, or Tab Paper are unavailable).

  1. Position the original.

  2. Press the [COPY] tab to display the [COPY] screen.

  3. Press [Output Setting].

    The [Output Setting] screen is displayed.

  4. Press [Z-Fold] under [Output].

  5. Press [OK] on the [Output Setting] screen.

    An icon representing specified output mode is displayed under [Output Setting] on the [COPY] screen.

    • The primary (main) tray gradually goes down while printed materials are output. DO NOT allow any object to interfere with the operation of the primary (main) tray on the left side of the finisher, as any interference may cause damage to the finisher.