Home CopyUsing Functions Manually

Using Functions Manually

Finisher FS-532 mounted with Post Inserter PI-502 can be operated manually with the control panel provided on the post inserter.

Finisher FS-532 provides the following output modes according to the optional configuration.

Finisher FS-532 + Post Inserter PI-502

Finishing options

Description

Finisher FS-532 +

Post Inserter PI-502

[Corner Staple] / [2 Position Staple]

Finisher FS-532 +

Post Inserter PI-502 + Punch Kit PK-522

[Corner Staple] / [2 Position Staple], [Punch]

Finisher FS-532 + Post Inserter PI-502 + Saddle Stitcher SD-510

[Corner Staple] / [2 Position Staple], [Fold & Staple], [Tri-Fold]

Button

Output

Staple mode selection button

[Fold & Staple]

[Corner Staple]

[2 Position Staple]

[Tri-Fold]

Punch button

Function

Paper (Size/Weight)

Number of sheets loaded

Output tray

[Corner Staple] / [2 Position Staple]

A3 , B4 , A4 /, B5 /, A5 , 11 17 , 8.5 14 , 8.5 11 /, 5.5 8.5 (50 g/m2 to 200 g/m2 / 14 lb Bond to 53 lb Bond)

100 sheets or less (paper length: 139 mm to 399 mm / 5.46" to 15.68")
50 sheets or less (paper length: 400 mm / 15.72" or longer)

Primary (main) tray

[Punch]

A3 to A5 (50 g/m2 to 200 g/m2 / 14 lb Bond to 53 lb Bond)

200 sheets (80 g/m2 / 21 lb Bond) or paper height of within 30 mm / 1.18"

Primary (main) tray

[Fold & Staple]

A3 , B4 , A4 , 12 18 , 11 17 , 8.5 14 , 8.5 11 (50 g/m2 to 200 g/m2 / 14 lb Bond to 53 lb Bond)
Up to 1 cover paper (200 g/m2 / 53 lb Bond) can be attached to be folded and stapled.

25 sheets or less (50 g/m2 to 61 g/m2 / 14 lb Bond to 17 lb Bond paper)
20 sheets or less (62 g/m2 to 80 g/m2 / 18 lb Bond to 21 lb Bond paper)
16 sheets or less (81 g/m2 to 91 g/m2 / 22 lb Bond to 24 lb Bond paper
5 sheets or less (92 g/m2 to 200 g/m2 / 25 lb Bond to 53 lb Bond paper)

Folder tray

[Tri-Fold]

A4 , 8.5 11

1 sheet (92 g/m2 to 105 g/m2 / 25 lb Bond to 28 lb Bond), 1 to 3 sheets (50 g/m2 to 91 g/m2 / 14 lb Bond to 24 lb Bond)

Folder tray

  • Paper should be placed only in the lower tray. Upper tray cannot be used.

  1. Place paper in the lower tray of the post inserter.

    • Corner Staple / 2 Position Staple: Place paper face up.

    • Punch : Place paper face up.

    • Fold & Staple: Place the face to be front side of the finished set up.

    • Tri-Fold: Place the face to be outside of the fold up.

    • Align the guide plate with the paper.

    • Do not punch special paper type such as labels or tracing paper. If you use special paper, unexpected trouble may be caused to the punch kit.

  2. Select the desired mode using the staple mode selection button and punch button.

    • To select Corner Staple / 2 Position Staple, Fold & Staple, or Tri-Fold, press the staple mode selection button to turn on the lamp of desired mode. To select Punch, press the punch button to turn on the lamp.

    [1]: Staple mode selection button

    [2]: Punch button

    [3]: Start/Stop button

    • Punch and Corner Staple / 2 Position Staple are compatible. To use it in combination, press the staple mode selection button to turn on the lamp. If any function other than Punch is not desired, turn off all the lamps except that of Punch.

  3. Open the [paper delivery handle] of the [folder tray] when Fold & Staple or Multi Tri-Fold mode is selected.

  4. Press the Start/Stop button on the control panel of the post inserter.

    • To stop the output, press the Start/Stop button again.