Full Image Area: Copying with Full Size
When copying is performed, the machine usually erases approximately 0.12 inches (3 mm) on the lead edge and 0.08 inches (2 mm) on front side of rear edge, back side of rear edge, and left/right edge.
Use the Full Image Area function to make copies printed completely to the edges without performing such an image erasing.
This function is useful when you need to print on the entire sheet of paper slightly larger than the original, such as printing on wide paper or making a B4-size copy from an A4-size original.
Original | Original | Output |
|---|---|---|
 | Normal mode | Full Image Area |
 |  |
Position the original.
Both the ADF and original glass are available.
Press [Application] on the [COPY] screen.
Press [Full Image Area] on the [Application] screen.
The incompatible function keys will be dimmed to show inactivity.
Press [OK] on the [Application] screen to return to the [COPY] screen.
The [Full Image Area] icon and shortcut key are displayed under [Application] on the [COPY] screen.
Enter the desired print quantity from the keypad on the control panel.
Press Start on the control panel.
Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen.