Home CopyCopy Protect: Printing a Text or Patter on the Entire Image

Copy Protect: Printing a Text or Patter on the Entire Image

When you use a sheet printed with the Copy Protect function as original, light gray-colored text and background as well as the copy image will be printed on the output result. With these text and background printed, the copy-protected output sheets will prevent illegal copy and information leakage.

  • There are four types of text: [Copy], [Invalid], [Illegal copy], and [Invalid copy]. There are three types of background: Cherry Blossoms, Arabesque, and Lattice. Select one from each category to use them in combination. You cannot select only the text or background.

  • The watermark and background always print in 100% magnification, while the original image is enlarged, reduced, or combined.

  • The text size of watermark is 44 points.

  • Printed position of watermark is the same as that of Set Numbering of Watermark.

    1. Position the original.

    2. Press [Application] on the [COPY] screen.

    3. Press [Stamp] on the [Application] screen.

    4. Press [Copy Protect] under [Watermark].

    5. Select the desired text and background pattern.

      Setting options

      Description

      [Text]

      Select one of the four text types.

      [Background]

      Select one of the three background patterns.

      • You cannot select only the text or background pattern.

    6. Press [OK] twice to complete the setting.

      • To resume the original settings, press [Cancel].

      • To cancel the Stamp function with the current setting saved, press [Function OFF].

    7. Press [OK] on the [Application] screen to return to the [COPY] screen.

      The [Stamp] icon is displayed under [Application] on the [COPY] screen.

    8. Enter the desired print quantity from the keypad on theĀ control panel.

    9. Press Start on the control panel.

      • Printing does not start without returning to the [COPY] screen. Be sure to display the [COPY] screen.