Overview of [Paper Setting]

[Paper Type]

The following five paper types are provided according to the plainness of paper.

For details about Paper Type, refer to Paper Type Descriptions.

[Plain], [Fine], [Book/News], [Embossed], [Blank Insert]

[Profile Name]

No entry can be made in setting the paper conditions for the tray to be used. Enter the paper profile name when you register the paper conditions specified for a tray.

Up to 50 one-byte characters (25 two-byte characters) can be entered for the name.

[Paper Size]

Selecting [Standard] automatically detects the standard size of paper loaded in the selected tray. *¹

Selecting [Custom] allows you to enter the desired dimensions from the screen. This setting can also be made by recalling a custom size previously registered.

To specify [Tab Paper], select either A4T/ or 8.5 11T/ and specify the number of tabs.

Detectable standard sizes vary depending on the paper tray.

[Custom]:

Trays 1 and 2: Widthwise 182 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 7.17" to 12.76", Lengthwise 5.47" to 18.23"

Trays 3 and 5 (Paper Feeder Unit PF-709): Widthwise 95 mm to 324 mm, Lengthwise 139 mm to 463 mm / Widthwise 3.74" to 12.76", Lengthwise 5.47" to 18.23"

Trays 3 (Large Capacity Unit LU-411): Widthwise 250 mm to 314 mm, Lengthwise 176 mm to 229 mm / Widthwise 9.84" to 12.36", Lengthwise 6.93" to 9.02"

Trays 3 (Large Capacity Unit LU-412): Widthwise 203 mm to 324 mm, Lengthwise 195 mm to 483 mm / Widthwise 7.99" to 12.76", Lengthwise 7.68" to 19.02"

Multi Bypass Tray MB-507: Widthwise 100 mm to 324 mm, Lengthwise 148 mm to 483 mm / Widthwise 3.94" to 12.76", Lengthwise 5.83" to 19.02"

Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 297 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 11.69" for Finisher FS-532 mounted with Post Inserter PI-502 (upper tray)

Widthwise 182 mm to 331 mm, Lengthwise 139 mm to 488 mm / Widthwise 7.17" to 13.03", Lengthwise 5.47" to 19.21" for Finisher FS-532 mounted with Post Inserter PI-502 (lower tray)

Up to 20 custom sizes can be registered and recalled.

[Tab Paper]:

A4T /, 8.5 11T / (Number of tabs: 1 to 15)

[Weight]

Select one from 13 types provided on the screen.

Only Tray 4 of Paper Feeder PF-709 is available to load paper with the weight 301 - 350 g/m² / 82-93 lb Bond.

The weight over 58 lb Bond (217 g/m²) cannot be selected for Book/News or Embossed selected as paper type.

Weight Setting:

40-49 g/m² / 10-13 lb Bond

50-54 g/m² / 14-15 lb Bond

55-61 g/m² / 16-17 lb Bond

62-74 g/m² / 18-19 lb Bond

75-80 g/m² / 20-21 lb Bond

81-91 g/m² / 22-24 lb Bond

92-105 g/m² / 25-28 lb Bond

106-135 g/m² / 29-36 lb Bond

136-162 g/m² / 37-43 lb Bond

163-216 g/m² / 44-57 lb Bond

217-256 g/m² / 58-68 lb Bond

257-300 g/m² / 69-81 lb Bond

301-350 g/m² / 82-93 lb Bond

Change Unit:

[g/m2], [Duodecimo-Kg], [Octavo-Kg], [A Book-kg], [B Book-kg], [lb Bond], [lb Index], [lb Cover], [lb Book], [lb Bristol], [lb Tag]

[Colored Paper]

Specify the color of paper. This setting easily gives the color information of paper loaded in the tray. If you specify colored paper to be fed automatically in [Type for Auto Paper], it disables automatic paper feeding from a tray for which paper of another color is specified.

[White], [Blue], [Goldenrod], [Gray], [Green], [Ivory], [Orange], [Pink], [Red], [Yellow], [Cream], [Clear White], [Others], [User Color]

[Punch]

Specify whether or not the paper is punched. The paper specified as punched cannot be punched even if [Punch] is selected in [Output Setting].

[Pre-Punched], [No Hole-Punch]

[Both Sides Adj.]

Adjusts [Zoom] ratios ([Vertical], [Horizontal]) and [Image Shift] amounts ([Up/Down], [Right/Left]) for both [Front] and [Back] pages in order to align the images printed on front and back pages in 2-sided printing. Also, [Gap],[Scan Meas.] or [Chart Adjustment] can be used for adjustment.

It is advisable to perform Both Sides Adjust for every paper to be used, as the shrinkage ratio differs according to the paper type, paper brand, or difference in temperature of storage location.

This option also allows you to adjust the registration loop before using the Both Sides Adjust function.

Vertical Zoom:

Front/Back -1.00 to +1.00 (1 step = 0.01%)

Horizontal Zoom:

Front/Back -0.50 to +0.50 (1 step = 0.01%)

[Image Shift][Up/Down]:

Front/Back -10.0 mm to +10.0 mm (1 step = 0.1 mm)

[Image Shift][Right/Left]:

Front/Back -10.0 mm to +10.0 mm (1 step = 0.1 mm)

[Registration Loop]:

Front/Back -9.9 mm to +9.9 mm (1 step = 0.1 mm)

[Air Assist]

Use this function to blow air to paper in order to prevent feeding multiple sheets or paper jam, which is likely to occur depending on the paper type. The Air Assist setting is available on Paper Feeder Unit PF-709.

[Auto], [ON], [OFF]

[Expert Adjustment]

Configure settings for the following items: Transfer Offset Adjustment, Lead/Rear Edge Erase Quantity, Fusing Temperature Adjustment, Process Speed Setting, Lead Edge Transfer Setting, Mis-centering Detect JAM, Correct Mis-centering, and Fusing PPM Down Setting.

For details about the Expert Adjustment function, refer to Details of Expert Adjustment.

Offset Lead Edge 1 (Front): -128 to +127

Offset Lead Edge 1 (Back): -128 to +127

Offset Lead Edge 2 (Front): -128 to +127

Offset Lead Edge 2 (Back): -128 to +127

Offset Lead Edge 3 (Front): -128 to +127

Offset Lead Edge 3 (Back): -128 to +127

Offset Image (Front): -128 to +127

Offset Image (Back): -128 to +127

Lead Edge Erase Quantity: 0 to +200

Rear Edge Erase Quantity: 0 to +200

Fusing Temperature Adjustment: -15 to +15

Process Speed Setting: [Default], [High Speed], [Low Speed]

Lead Edge Transfer Setting: [Lead Edge Image], [Auto], [Separation], [Separation(+1)], [Separation(+2)], [Separation(+3)]

Mis-centering Detect JAM: [Detect], [Not Detect]

Correct Mis-centering: [ON], [OFF]

Fusing PPM Down: [ON(Manual)], [ON(Auto)], [OFF]

[Curl Adjustment]

Select whether or not to correct the curl of output paper.

[Correct Upward], [OFF]