Original Type: Selecting Type of Original
Printed image quality is adjusted according to the type of the original.
The density level can be shifted in each of 7 modes of [Type]. For details, refer to Original Density Shift: Adjusting the Original Density Shift Amount.
Key | Description |
|---|---|
 | Function appropriate for copying printed originals including both text and photo, such as a brochure and catalog. |
 | Function appropriate for when the photo part of the original including both text and photo is printed on photographic paper. |
 | Function appropriate for copying printed originals, such as a brochure and catalog. Reproduces half-tone photo images as much as possible, which can hardly be reproduced in normal mode. |
 | Function appropriate for when the photo part of the original is printed on photographic paper. Reproduces half-tone photo images as much as possible, which can hardly be reproduced in normal mode. |
 | Function appropriate for copying originals composed of text only. In this mode, the edges of copied texts are sharpened to provide higher legibility. |
 | This function is available to copy an original with no contrast that looks as if it has been written using a pencil. You can obtain a clear image with good contrast. |
 | Function appropriate for copying colored originals and originals with colored fine lines such as a map. Sharp copy images are provided. |
Position the original.
Press the [COPY] tab to display the [COPY] screen.
Press [Original Setting].
The [Original Setting] screen is displayed.
Select the desired mode key from [Type].
Press [OK] to return to the [COPY] screen.
To restore the default setting, press [Default Set] and to restore the previous setting, press [Cancel].