[Basic] Screen

[Original Size]

Displays the paper size of the original set in the job.

[Original Orientation]

Displays the page orientation of the original set in the job.

[Paper Tray]

Select a paper tray to be used. Trays to be displayed vary depending on the configuration of device options. A complete set of trays to be selected includes Trays 1 to 5 and the bypass tray.

[Check Tray Settings]

Incorporates the display details of the tray list on the [Paper] screen corresponding to the paper tray being selected into each item of the [paper size].

[Paper Profile]

Select the paper profile to use.

The paper information of the selected paper profile will be incorporated into the items of the [paper size].

[Paper Size]

Select the output paper size.

[Custom Size]

To use the custom size, register the paper size in [Custom Size Settings] screen displayed when clicked and select the size from the Paper Size list. For details about how to register the size, refer to Custom Size Settings Screen.

[Feed Direction]

As the feed direction, specify [Auto], [Long Edge], or [Short Edge].

[Paper Type]

Select a paper type.

[Weight]

Specify the paper weight.

[Weight Unit]

Select the unit for the paper weight.

[Color]

Select color of the paper.

[Color Name]

If [User Color] is selected for [Color], enter the color name of the paper. Enter the color name of the paper within 20 characters. All the characters except the double quotation mark (") are available.

[Pre-Punched]

Select punch holes.

[Number of Copies]

Specify the number of copies.

[Page Range]

Specify the print range. Up to 10,000 pages can be specified.

This setting is not retained even if you click [Save]. (Closing the [Job Edit] screen restores the original setting) It is enabled only when printing the job by pressing [Print].