Set up Color Centro
In order to use Color Centro, you must first perform the setup.
The setup refers to a series of preparatory procedures, from connecting the image controller with the computer to installing Color Centro on your computer.
Connect the image controller and the computer to the network.
Check that the computer is connected to the network.
Check the machine's IP address and the port number in the [JSP Setting].
For details, refer to Settings of the Image Controller.
Install Color Centro.
For details, refer to Installation of Color Centro.
Set the network port for the printer driver according to the connection method or protocol. Prepare and Adjust Printer Functions
For details about the interface, refer to Interface.
For details about the network settings and the IP address of the machine, refer to NIC Setting: Setting the Machine Network Information.