Finish

[Staple]

[Left Corner], [Right Corner], [2 Position (Left)], [2 Position (Right)], [2 Position (Top)]

Set this to specify stapling.

From the drop-down list, specify the number of staples and the stapling position.

When the [Top Bind] is specified in the [Binding Position], you can specify the [2 Position (Top)].

[Dual Staple Pitch]

[Wide], [Narrow], [Narrow+]

Specifies the pitch between two staples.

[Fold & Staple]

Off, On

Set this to use the center staple and fold function.

[Punch]

[2-Hole (Left)], [2-Hole (Right)], [2-Hole (Top)]

[3-Hole (Left)], [3-Hole (Right)], [3-Hole (Top)]

[4-Hole (Right)], [4-Hole (Right)], [4-Hole (Top)]

[Multi Punch (Left)], [Multi Punch (Right)], [Multi Punch (Top)]

Set this to specify hole punching.

From the drop-down list, specify the number of punches and the punching position.

When the [Top Bind] is specified in [Binding Position], you can specify the [2-Hole (Top)], [3-Hole (Top)], or [4-Hole (Top)].

[Fold]

[Z- Fold]

[Multi-Letter Fold In], [Multi-Letter Fold Out], [Multi-Half Fold In], [Multi-Letter Fold Out]

Set the fold function.

From the drop-down list, select the folding condition.

[Divide Output]

Off, On

Set this to divide a job and to output with stapling per divided job.

[Pages per Section]

Specify a unit when dividing a job .

[Output Tray]

[Auto]

[Primary (main) tray]

[Secondary (sub) tray]

Select the tray to output the printed pages.

[Output Order]

[Face Down (1 to N)]

[Face Down (N to 1)]

[Face UP (N to 1)]

[Face Up (1 to N)]

Select [Face Up] to output printed paper with its face up.

If you want to print an original in a reverse order, select [N to 1].

[Tandem Mode]

Off, On

When printing multiple copies of a document, connect two printers in parallel to divide copies for printing.
This function reduces the time required for printing when you want to print a large number of copies.

• Before using this function, connect two printers in tandem mode to set them as the master and sub machines respectively.

• For details, contact your service representative.

[Ring Binding]

Off, On

Set this to bind the printed paper using ring-shaped binder.

[Ring Binding Settings]

[Outside Print], [Inside Print]

Specify the print side for the top sheet and the last sheet.

[Needless Tab Ejection]

Off, On

Select this option to output unnecessary tab paper.